Tornado 98169 Brush Assembly Parts

Brush assembly parts for the Tornado 98169 Marathon 1200 230-volt extractor. This assembly does the mechanical work of cleaning, and it is the one that wears fastest.

What the Tornado 98169 brush parts sheet covers

The Tornado 98169 brush parts on this sheet all serve one job: turning a 17-inch carpet brush roller inside a 20-inch cleaning head. The roller runs in sealed bearings carried in bearing blocks at each end, is driven by a belt from a pulley on the brush motor, and is enclosed by a shroud with a latch lever so it can be opened for cleaning. This sheet covers all of it: the roller itself, the brush shaft and pulley, the bearings, bearing blocks and seals, the belt, the shroud and its latch lever, clamp and cap, the base plate and its gasket, the brush cover plate, the spray bar nozzles that sit ahead of the brush, and the brush motor.

The roller and the belt are the two parts most often replaced. Bristles that have splayed or gone short stop agitating carpet effectively long before the roller looks obviously finished, and a glazed or stretched belt shows up as a brush that stalls under load or stops turning when the carpet is wet and heavy. Bearings announce themselves with noise and roughness as the roller is turned by hand. The roller is available on its own and also as a complete roller assembly with the shaft and bearings already fitted, which is the quicker repair if the bearings have gone at the same time as the bristles.

One part on this sheet is voltage-specific: the brush motor on the 98169 is the 230-volt item and does not interchange with the motor on the 115-volt Tornado 98168 Marathon 1200. Everything mechanical — roller, bearings, belt, shroud, gaskets — is shared with the 98168 and, for several part numbers, with the Marathon 800 machines 98166 and 98167 as well.

Working on a different area of the machine? Related assemblies: main assembly control panel service parts wiring diagram.

Frequently Asked Questions

How do I know when the Tornado 98169 brush roller needs replacing?

Look at the bristles rather than the core. When they have splayed outward or worn short they stop lifting and agitating carpet fibre, even though the roller still turns freely. Cleaning results fall off noticeably before the roller looks worn out.

Why does my Tornado 98169 brush stop turning on wet carpet?

Most often a belt that has stretched or glazed and is slipping under load. Replace the belt first. If the new belt also slips, check the bearings for drag and the shroud for anything jammed against the roller.

Is the Tornado 98169 brush motor the same as the 98168?

No. The brush motor is one of the voltage-specific parts: the 98169 uses the 230-volt motor and the 98168 uses the 115-volt one. The roller, bearings, belt and shroud are shared between the two machines.

How do I order a Tornado 98169 brush part or get help?

Add it to your cart on its product page or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has serviced Tornado extractors since 1956 and can tell you whether you need the roller alone or the complete roller assembly.

Not sure which Tornado 98169 brush part you need? Call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428. We have been selling and servicing Tornado floor-care equipment since 1956, and we can confirm the right part against your machine’s serial number before you order. You can also browse the full Tornado 98169 20" Marathon 1200 (12 Gallon, 230V) parts catalog or the wider Tornado cleaning equipment parts range, and see the machine’s own specifications on the Tornado manufacturer site.

Showing 1–20 of 36 results