1. Height Adjust Assembly2. Inlet Manifold3. Hub Cap4. E-Clip .31253. Hub Cap4. E-Clip .31255. Large Overmolded Wheel Assembly6. E-Clip .2507. Rear Wheel Axle7. Rear Wheel Axle5. Large Overmolded Wheel AssemblyNozzle Light Board Assembly (See list below)9. Reflector10. Agitator Assembly11. Retaining Ring12. Small Overmolded Wheel Assembly13. Height Adjust Axle12. Small Overmolded Wheel Assembly11. Retaining Ring14. Agitator Bottom Seal15. Baseplate Cover Assembly16. Belt Idler Assembly Hall Sensor17. Agitator Top Seal18. Idler Arm Cover19. Belt20. Nozzle Base Tray21. Strain Relief Washer22. Pivot Bracket Left23. Pivot Bracket Right24 Tilt Lock Pivot25. Foot Pedal Assembly26. E-Clip .25027. Tilt Lock Spring28. Spring Assist Spring29. Spring Assist Mount30. Spring Assist Axle Shaft31. Dirt Sensor Assembly (R30P.DS, R30D.ANNV)32. Dirt Sensor CoverRiccar R30 Base Tray Parts
The base tray is the floor head of your Riccar R30 upright. It holds the wheels, the agitator and belt, the nozzle light board and the tilt lock and foot pedal parts. This page lists every base tray part for the Riccar R30D, R30P, R30P.DS, R30PET, R30D.4, R30D.6, R30PET.4 and R30D.ANNV, with part numbers, prices and a direct link to each part.
Common wear items such as the belt (A014-0100), the agitator assembly (D475-0500) and the agitator seals are sold individually, so you can replace only the part that has worn out. Nozzle light board and dirt sensor parts are listed by model, so check the part number against your vacuum before you order.
Riccar R30 Base Tray Parts Parts List
| Pos # | Image | Part Name | Part No# | Price | View Link |
|---|---|---|---|---|---|
| 1 | Height Adjust Assembly | D474-1200 | $17.58 | View Part | |
| 2 | ![]() | Inlet Manifold | B470-8814B | $4.38 | View Part |
| 3 | ![]() | Hub Cap | B370-4366B | $3.28 | View Part |
| 4 | ![]() | E-Clip .3125 | A732-3100 | $3.28 | View Part |
| 5 | ![]() | Large Overmolded Wheel Assembly | C370-1200B | $7.68 | View Part |
| 6 | ![]() | E-Clip .250 | A732-3000 | $3.28 | View Part |
| 7 | ![]() | Rear Wheel Axle | B470-8600B | $3.28 | View Part |
| 8 | ![]() | Nozzle Light Board Assembly (R30D, R30P, R30PET) | D418-0600 | $62.68 | View Part |
| 8 | ![]() | Nozzle Light Board Dirt Sensor (R30P.DS) | B418-1600 | $58.28 | View Part |
| 8 | ![]() | Nozzle Light Board Assembly (R30D.4, R30D.6, R30PET.4) | D418-0700 | $82.48 | View Part |
| 8 | Nozzle Light Board Dirt Sensor Assembly (R30D.ANNV) | D418-1700 | $89.08 | View Part | |
| 9 | ![]() | Reflector | B470-40B3 | $4.38 | View Part |
| 10 | ![]() | Agitator Assembly | D475-0500 | $87.98 | View Part |
| 11 | ![]() | Retaining Ring | B350-4000B | $3.28 | View Part |
| 12 | ![]() | Small Overmolded Wheel Assembly | C370-1300 | $5.48 | View Part |
| 13 | ![]() | Height Adjust Axle | B470-2500B | $12.08 | View Part |
| 14 | ![]() | Agitator Bottom Seal | B388-2500C | $3.28 | View Part |
| 15 | ![]() | Baseplate Cover Assembly | D470-1100D | $61.58 | View Part |
| 16 | ![]() | Belt Idler Assembly Hall Sensor | D475-0400 | $58.28 | View Part |
| 17 | ![]() | Agitator Top Seal | B388-2400C | $3.28 | View Part |
| 18 | ![]() | Idler Arm Cover | B375-0214 | $3.28 | View Part |
| 19 | Belt | A014-0100 | $17.58 | View Part | |
| 20 | ![]() | Nozzle Base Tray | B470-1514F | $26.38 | View Part |
| 21 | ![]() | Strain Relief Washer | B034-0100 | $3.28 | View Part |
| 22 | ![]() | Pivot Bracket Left | B470-2200 | $5.48 | View Part |
| 23 | ![]() | Pivot Bracket Right | B470-2300 | $5.48 | View Part |
| 24 | ![]() | Tilt Lock Pivot | B370-3600 | $5.48 | View Part |
| 25 | ![]() | Foot Pedal Assembly | C370-1400E | $17.58 | View Part |
| 26 | ![]() | E-Clip .250 | A732-3000 | $3.28 | View Part |
| 27 | Tilt Lock Spring | B370-3800 | $3.28 | View Part | |
| 28 | ![]() | Spring Assist Spring | B470-2700B | $4.38 | View Part |
| 29 | ![]() | Spring Assist Mount | B370-4214C | $3.28 | View Part |
| 30 | ![]() | Spring Assist Axle Shaft | B470-2600 | $3.28 | View Part |
| 31 | ![]() | Dirt Sensor Assembly (R30P.DS, R30D.ANNV) | C375-1600 | $36.28 | View Part |
| 32 | Dirt Sensor Cover | B470-8914 | View Part |
Which nozzle light board and dirt sensor parts fit your model
The nozzle light board depends on your model. The Nozzle Light Board Assembly D418-0600 is for the R30D, R30P and R30PET, and D418-0700 is for the R30D.4, R30D.6 and R30PET.4. The Nozzle Light Board Dirt Sensor B418-1600 is for the R30P.DS, and the Nozzle Light Board Dirt Sensor Assembly D418-1700 is for the R30D.ANNV. The Dirt Sensor Assembly (C375-1600) is listed for the R30P.DS and R30D.ANNV.
How to use this parts list
Use the Pos # column to match a part to the numbered callout in the parts diagram, then use View Part to open the product page for that part number.
The B418-1600 light board for the R30P.DS does not include the Reflector (B470-40B3), which is sold separately. The E-Clip .250 (A732-3000) appears twice in the diagram, at Pos 6 and Pos 26, and is the same part in both places.
Frequently asked questions
Which belt does the Riccar R30 use?
The Belt (A014-0100) is listed in the base tray parts for the Riccar R30. It is sold individually along with the Belt Idler Assembly with Hall Sensor (D475-0400) and the Idler Arm Cover (B375-0214).
Which nozzle light board do I need?
D418-0600 is for the R30D, R30P and R30PET. D418-0700 is for the R30D.4, R30D.6 and R30PET.4. B418-1600 is for the R30P.DS and D418-1700 is for the R30D.ANNV.
Does the R30P.DS light board include the reflector?
No. The Nozzle Light Board Dirt Sensor (B418-1600) does not include the reflector. The Reflector (B470-40B3) is a separate part.
Why is the E-Clip .250 listed twice?
The E-Clip .250 (A732-3000) is used in two places, at Pos 6 and Pos 26. Both use the same part number.
Need help finding the right part? Call Twin City Vacuum at 763-535-0770 or visit us at 5415 W Broadway, Crystal, MN. Have your vacuum’s model number ready.





























