Tornado 12″ CVD 30 Lock Washer
$1.99
Genuine Tornado lock washer for the 12″ CVD 30 upright commercial vacuum, Model 91430. Part number K63431190. In stock and ready to ship from Twin City Vacuum.
The Tornado Lock Washer (part# K63431190) is a lock washer used in the brush-head assembly of Tornado’s CV and CVD uprights to keep a bolted fastener from loosening under vibration.
Compatible Models for the Lock Washer
- Tornado 15″ CV 38/2 HEPA Filter Upright Vacuum — Model 91415
- Tornado 19″ CV 48/2 HEPA Filter Upright Vacuum — Model 91419
- Tornado 12″ CVD 30 Single Motor Upright Vacuum — Model 91430
- Tornado 15″ CVD 38 Single Motor Upright Vacuum — Model 91438
- Tornado 15″ CVD 38/2 HEPA Filter Upright Vacuum — Model 91440
- Tornado 19″ CVD 48/2 HEPA Filter Upright Vacuum — Model 91442
- Tornado 12″ CV 30 Single Motor Upright Vacuum — Model 91449
- Tornado 15″ CV 38 Single Motor Upright Vacuum — Model 91451
- Tornado CMP-5T Champ
A lock washer maintains tension on its fastener so it won’t back off as the machine runs and vibrates. Because the brush-head hardware is common across the CV/CVD line, this washer fits a wide range of Tornado uprights.
Replace the lock washer if it is flattened, cracked, or corroded, or has lost its spring tension so it no longer keeps its fastener tight.
The Lock Washer (part# K63431190) fits the Tornado 15″ CV 38/2 HEPA (Model 91415), 19″ CV 48/2 HEPA (Model 91419), 12″ CVD 30 (Model 91430), 15″ CVD 38 (Model 91438), 15″ CVD 38/2 HEPA (Model 91440), 19″ CVD 48/2 HEPA (Model 91442), 12″ CV 30 (Model 91449), 15″ CV 38 (Model 91451), CMP-5T Champ. Twin City Vacuum has sold and serviced Tornado equipment since 1956 and sources every part directly from Tacony. Browse the Tornado CVD 30 or CVD 38 parts catalog, or read more at the Tornado manufacturer site.
Frequently Asked Questions
What does the Lock Washer (part# K63431190) do?
It keeps a bolted fastener in the brush-head assembly from loosening under the machine’s vibration by maintaining tension on the joint.
When should the Lock Washer be replaced?
Replace it if it’s flattened, cracked, corroded, or has lost its spring so it no longer keeps its fastener tight.
What models is the Lock Washer (part# K63431190) compatible with?
It fits the Tornado 15″ CV 38/2 HEPA (Model 91415), 19″ CV 48/2 HEPA (Model 91419), 12″ CVD 30 (Model 91430), 15″ CVD 38 (Model 91438), 15″ CVD 38/2 HEPA (Model 91440), 19″ CVD 48/2 HEPA (Model 91442), 12″ CV 30 (Model 91449), 15″ CV 38 (Model 91451), CMP-5T Champ.
How do I order the Lock Washer or get help?
You can add the Lock Washer (part# K63431190) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
