Wire Harness DC Handle/PCB Commercial #4 with Two #11 Posts For Battery ULW, #10 neck Coupling Back And #12 Cable Cover. D223-6000

The handle/PCB wiring harness (part# D223-6000) is the complete upper wiring assembly for the Tornado Roam 97300, bundling the harness, two battery posts, neck coupling, and cable cover that connect the handle controls to the machine.

On the Tornado Roam / 97300 / 97300C, this harness routes power and signal between the battery posts, control board, and switch through the handle and neck of the machine. Supplied complete with its battery posts, neck coupling, and cable cover, part# D223-6000 restores the entire upper electrical run in one part so the controls, charging, and motor power all connect reliably.

Install the harness when wiring in the handle or neck is chafed, broken, or corroded, when the battery posts are damaged, or when the machine has intermittent power or control faults traced to the upper wiring. Because it carries the main battery and control connections, it is best fitted by someone familiar with the machine’s electrical layout.

Compatible Models for the Handle / PCB Wiring Harness

Part# D223-6000 is a genuine Tacony component shared across multiple brands. Per PartSmart Where Used, it is confirmed compatible with the following models:

• Tornado: Roam 97300, Roam 97300C
• Riccar: R10CV
• Simplicity: S10CV, SC10CV
• CleanMax: Zoom ZM-800

Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and the Handle / PCB Wiring Harness (part# D223-6000) ships from our shop at 5415 West Broadway, Crystal, MN 55428. Browse the complete Tornado Roam 97300 / 97300C parts catalog for matching components, or view the machine on the manufacturer’s site at tornadovac.com.

Frequently Asked Questions

What does the Handle / PCB Wiring Harness do on the Tornado Roam 97300?

The handle/PCB wiring harness (part# D223-6000) is the complete upper wiring run on the Tornado Roam 97300 / 97300C, with battery posts, neck coupling, and cable cover, linking the handle controls, charging, and motor power.

How do I know if my Handle / PCB Wiring Harness needs replacing?

Replace it when the handle or neck wiring is chafed, broken, or corroded, the battery posts are damaged, or the machine has intermittent power or control faults traced to the upper wiring.

What models is the Handle / PCB Wiring Harness (part# D223-6000) compatible with?

Part# D223-6000 is a shared Tacony part confirmed by PartSmart to fit multiple models across Tornado, Riccar, Simplicity and CleanMax — including the Tornado Roam 97300 and 97300C. See the Compatible Models list above for the full breakdown, or call 763-535-0770 to confirm your exact machine.

How do I order the Handle / PCB Wiring Harness (part# D223-6000) or get help?

You can add the Handle / PCB Wiring Harness (part# D223-6000) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions about the Handle / PCB Wiring Harness (part# D223-6000)? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.