Mytee BZ-102LX-AUTO Breeze Parts Diagrams

Find genuine Mytee BZ-102LX-AUTO parts for the BZ-102LX-AUTO Breeze, the 220 PSI portable carpet extractor with auto-fill, pump-out, chemical injection and two LX vacuum motors. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.

Mytee BZ-102LX-AUTO Breeze Parts Diagrams

Mytee BZ-102LX-AUTO Breeze base, pump, pump-out and vacuum motor parts diagram

Base, Pumps & Vacuum Motors

Mytee BZ-102LX-AUTO Breeze drawing

Mytee BZ-102LX-AUTO Breeze solution tank and auto-fill parts diagram

Solution Tank & Auto-Fill

Mytee BZ-102LX-AUTO Breeze drawing

Mytee BZ-102LX-AUTO Breeze recovery tank parts diagram

Recovery Tank

Mytee BZ-102LX-AUTO Breeze drawing

Mytee BZ-102LX-AUTO Breeze chemical injection bottle parts diagram

Chemical Injection Bottle

Mytee BZ-102LX-AUTO Breeze drawing

The BZ-102LX-AUTO book has four drawings: the base and pumps, the solution tank with auto-fill, the recovery tank, and the chemical injection bottle.

About Mytee BZ-102LX-AUTO Parts

The BZ-102LX-AUTO has a 10-gallon solution tank with garden-hose auto-fill, a C381 3.3 GPM pump-out pump, chemical injection, two LX vacuum motors rated at 250 CFM and 182 in of water lift, and a 220 PSI pump. It has no heater.

Weak suction usually comes from the recovery tank lid gasket, the drain valve, a filter or the float shut-off, and only then from the C348 motors. Low or unsteady pressure points to the B119A strainer, the pulse hose or the pump. An overflowing tank on auto-fill means the H541A float valve.

Most Breeze parts are shared across the line. The P696 base, the P697 solution tank and the P698 recovery tank fit every Breeze, and so do the filters, the drain valve and most of the brass fittings. What sets the AUTO apart is the auto-fill plumbing, the pump-out pump and its garden-hose fittings, and the chemical injection bottle. When you order, match the item number on the drawing as well as the part name, because several hoses and fittings look alike but differ in length or thread.

Shop the Mytee BZ-102LX-AUTO Breeze, browse all Mytee parts, or see the manufacturer’s documents on the BZ-102LX-AUTO page at mytee.com.

Frequently Asked Questions

Which pump-out pump does the BZ-102LX-AUTO use?

The C381 3.3 GPM pump-out pump.

Which auto-fill valve does it use?

The H541A float valve.

How is the BZ-102LX-AUTO different from the BZ-102LX?

The AUTO adds auto-fill, pump-out and chemical injection. About two thirds of the parts are shared.

How do I order a BZ-102LX-AUTO part that is not listed online?

Call us at 763-535-0770 with the item number from the drawing. Our parts desk at 5415 West Broadway, Crystal, MN 55428 has served cleaning equipment owners since 1956.