Mytee BZ-102LXH Breeze Parts Diagrams

Find genuine Mytee BZ-102LXH parts for the BZ-102LXH Breeze, the heated 220 PSI portable carpet extractor with two LX vacuum motors and a 1,600-watt heater. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.

Mytee BZ-102LXH Breeze Parts Diagrams

Mytee BZ-102LXH Breeze heated base, pump and vacuum motor parts diagram

Base, Pump & Vacuum Motors

Mytee BZ-102LXH Breeze drawing

Mytee BZ-102LXH Breeze heated solution tank parts diagram

Solution Tank

Mytee BZ-102LXH Breeze drawing

Mytee BZ-102LXH Breeze heated recovery tank parts diagram

Recovery Tank

Mytee BZ-102LXH Breeze drawing

Mytee BZ-102LXH Breeze A908 1600 watt heater parts diagram

A908 Heater

Mytee BZ-102LXH Breeze drawing

The A145 loading wheel kit has its own drawing, which the Breeze shares with the 1005LX and the LTD Speedsters.

BZ-102LXH Accessories

The BZ-102LXH parts book lists the A145 Loading Buddy, which is also sold on its own.

About Mytee BZ-102LXH Parts

The BZ-102LXH has a 10-gallon solution tank, two LX vacuum motors rated at 250 CFM and 182 in of water lift, a 220 PSI pump and a 1,600-watt heater. A variable switch system lets it run from two cords.

Weak suction usually comes from the recovery tank lid gasket, the drain valve, a filter or the float shut-off, and only then from the C348 motors. Low or unsteady pressure points to the B119A strainer, the relief valve or the C322D pump. A cold heater points to the thermostats and heating rods.

Most Breeze parts are shared across the line. The P696 base, the P697 solution tank and the P698 recovery tank fit every Breeze, and so do the filters, the drain valve and most of the brass fittings. What sets the LXH apart is the A908 heater and its wiring, the C322D pump and the H641 switch plate. When you order, match the item number on the drawing as well as the part name, because several hoses and fittings look alike.

Shop the Mytee BZ-102LXH Breeze Heated, browse all Mytee parts, or see the manufacturer’s documents on the BZ-102LXH page at mytee.com.

Frequently Asked Questions

Which pump does the Mytee BZ-102LXH use?

The C322D 220 PSI pump.

What heater is in the BZ-102LXH?

The A908 1,600-watt heater, which has its own drawing.

How is the BZ-102LXH different from the BZ-102LX?

The LXH adds the A908 heater, a different pump and its own switch plate. About three quarters of the parts are shared.

How do I order a BZ-102LXH part that is not listed online?

Call us at 763-535-0770 with the item number from the drawing. Our parts desk at 5415 West Broadway, Crystal, MN 55428 has served cleaning equipment owners since 1956.