Mytee BZ-105LX-AUTO Breeze Parts Diagrams

Find genuine Mytee BZ-105LX-AUTO parts for the BZ-105LX-AUTO Breeze, the 500 PSI portable carpet extractor with auto-fill, pump-out and two LX vacuum motors. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.

Mytee BZ-105LX-AUTO Breeze Parts Diagrams

Mytee BZ-105LX-AUTO Breeze base, 500 PSI pump, pump-out and vacuum motor parts diagram

Base, Pumps & Vacuum Motors

Mytee BZ-105LX-AUTO Breeze drawing

Mytee BZ-105LX-AUTO Breeze solution tank and auto-fill parts diagram

Solution Tank & Auto-Fill

Mytee BZ-105LX-AUTO Breeze drawing

Mytee BZ-105LX-AUTO Breeze recovery tank parts diagram

Recovery Tank

Mytee BZ-105LX-AUTO Breeze drawing

The A145 loading wheel kit has its own drawing, which the Breeze shares with the 1005LX and the LTD Speedsters.

BZ-105LX-AUTO Accessories

The BZ-105LX-AUTO parts book lists these items with the machine but does not draw them. Each one is also sold on its own.

About Mytee BZ-105LX-AUTO Parts

The BZ-105LX-AUTO has a 10-gallon solution tank with garden-hose auto-fill, a C381 3.3 GPM pump-out pump, a 500 PSI piston pump and two LX vacuum motors rated at 250 CFM and 182 in of water lift. It has no heater.

Weak suction usually comes from the recovery tank lid gasket, the drain valve, a filter or the float shut-off, and only then from the C348 motors. Low or unsteady pressure points to the B119A strainer, the C313C regulator or the C342 pump. An overflowing tank on auto-fill means the H541A float valve.

Most Breeze parts are shared across the line. The P696 base, the P697 solution tank and the P698 recovery tank fit every Breeze, and so do the filters, the drain valve and most of the brass fittings. What sets the BZ-105LX-AUTO apart is the 500 PSI pump with its regulator and gauge, plus the auto-fill float valve and the pump-out pump with their garden-hose fittings. When you order, match the item number on the drawing as well as the part name, because several hoses and fittings look alike.

Shop the Mytee BZ-105LX-AUTO Breeze, browse all Mytee parts, or see the manufacturer’s documents on the BZ-105LX-AUTO page at mytee.com.

Frequently Asked Questions

Which pump does the Mytee BZ-105LX-AUTO use?

The C342 500 PSI pump with the C313C regulator.

Which pump-out pump does it use?

The C381 3.3 GPM pump-out pump.

How is the BZ-105LX-AUTO different from the BZ-105LX?

The AUTO adds auto-fill and pump-out. The two share about 70% of their parts.

How do I order a BZ-105LX-AUTO part that is not listed online?

Call us at 763-535-0770 with the item number from the drawing. Our parts desk at 5415 West Broadway, Crystal, MN 55428 has served cleaning equipment owners since 1956.