Mytee Carpet Shark CRB3017 Parts Diagrams

Find genuine Mytee Carpet Shark CRB3017 parts for the 17 in counter-rotating brush machine. Click your part on Mytee’s factory drawing and order it. Can’t find your part? Call us at 763-535-0770.

Mytee Carpet Shark CRB3017 Parts Diagrams

Mytee Carpet Shark CRB3017 Machine Drawing drawing

Machine Drawing

Items 1–65

CRB3017 Accessories

The parts book lists these items with the machine but does not draw them. Each one is also sold on its own.

About Mytee Carpet Shark CRB3017 Parts

The Carpet Shark CRB3017 runs two H965A 17 in brushes in opposite directions, each driven by its own C354 geared motor through a 20 tooth pulley, a 76 tooth H971A belt and a 39 tooth pulley. The brushes ride on H962 bearings, magnets on the catcher plates pick up pins and staples, and the P564A transport tray carries the machine between jobs.

If a brush stops under load, check its belt and pulleys before the motor. If the machine will not start, check the E414 switch, the E534 pigtail and the E397 rectifier. Rows marked Call are parts Mytee does not sell online; call us and we will order them. Twin City Vacuum has sold and serviced cleaning equipment in Crystal, Minnesota since 1956.

Shop the Mytee Carpet Shark CRB3017, browse all Mytee parts, or see the manufacturer’s documents on the CRB3017 page at mytee.com.

Frequently Asked Questions

How do I find a part on my Mytee Carpet Shark CRB3017?

Open the drawing, click the numbered dot on the part, and it opens that part’s page.

What brushes does the CRB3017 use?

Two H965A 17 in brushes.

Does the CRB3017 share parts with the other Carpet Shark?

Yes. The motors, belts, pulleys, bearings, switch, rectifier and handle parts are shared; the brushes, shafts, covers, crossbars and tray differ.