Find genuine Mytee ECO17-PRO and ECO14-PRO parts for the ECO-PRO all-surface orbital floor machines. Both machines share one factory drawing and almost every part, so they are on one page. Click your part on the drawing and order it. Can’t find your part? Call us at 763-535-0770.
Mytee ECO17-PRO and ECO14-PRO Parts Diagrams
ECO-PRO Machine Drawing
Items 1–106, both models
ECO-PRO Accessories
These items go with the ECO-PRO machines or are the parts most often replaced.
About Mytee ECO17-PRO and ECO14-PRO Parts
Which machine do you have? The ECO17-PRO has a 17 in head and the ECO14-PRO a 14 in head; the model number is on the data plate. Only the motor mount plate (item 19), the bumper (item 20), items 31 and 65, and item 106 differ, and the parts table labels each of those rows with the machine it fits. You can also shop the Mytee ECO14-PRO machine.
Both machines drive the pad with a C327A 1.5 hp motor through an H556A offset bearing and H570 counterweight, so the pad orbits instead of spinning. A C324 demand pump feeds the spray jets from the solution tank on the handle. If the machine shakes, check the counterweight and offset bearing; if the jets spray weakly, clean the B645B filter bodies and B645C tips. Rows marked Call are parts Mytee does not sell online; call us and we will order them. Twin City Vacuum has sold and serviced cleaning equipment in Crystal, Minnesota since 1956.
Shop the Mytee ECO17-PRO and ECO14-PRO, browse all Mytee parts, or see the manufacturer’s documents on the ECO-PRO page at mytee.com.
Frequently Asked Questions
How do I find a part on my Mytee ECO-PRO?
Open the drawing, click the numbered dot on the part, and it opens that part’s page. Check the labeled rows if your machine is the ECO14-PRO.
Are ECO17-PRO and ECO14-PRO parts interchangeable?
Almost all of them. The motor mount plate, bumper and three other items differ, and they are labeled in the table.
What motor do the ECO-PRO machines use?
The C327A 1.5 hp, 1,725 RPM motor.




