Find genuine Mytee LTD12-LX parts for the LTD12-LX Speedster LTD, the 1,000 PSI tile, grout and carpet extractor with LX vacuum motors, auto-fill, chemical injection and pump-out. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.
Mytee LTD12-LX Speedster Parts Diagrams
Base & 1,000 PSI Pump
Mytee LTD12-LX drawing
Solution Tank, Auto-Fill & Chemical Injection
Mytee LTD12-LX drawing
Vacuum Tank, LX Motors & Switches
Mytee LTD12-LX drawing
A145 Loading Wheel Kit
Shared with the 1005LX and LTD5-LX
Three items in the LTD12-LX parts book have no callout on the drawings: the B127 plug, the B170 ferrule and the H074 switch plate. They are listed in the tables without dots.
LTD12-LX Speedster Accessories
These items from the LTD12-LX parts book are also sold on their own.
About Mytee LTD12-LX Parts
The LTD12-LX has an 11-gallon solution tank with garden-hose auto-fill, chemical injection and a C381 3.3 GPM pump-out pump. Its 1,000 PSI piston pump runs at 2.2 GPM for tile and grout as well as carpet. Two LX vacuum motors give it 250 CFM and 145 in of water lift. It has no heater.
Weak suction usually comes from the vacuum lid gasket, the drain valve, a filter or the float shut-off, and only then from the C348 and C351 motors. Low or unsteady pressure points to the strainer, the C359C regulator or the C359A pump. An overflowing tank on auto-fill means the H541A float valve.
Shop the Mytee LTD12-LX Speedster LTD, browse all Mytee parts, or see the manufacturer’s documents on the LTD12-LX page at mytee.com.
Frequently Asked Questions
Which pump does the Mytee LTD12-LX use?
The C359A Pumptec pump motor set with the C359C 1,000 PSI regulator.
Which vacuum motors are in the LTD12-LX?
A C348 LX motor with inlet tube and a C351 low-amp LX motor.
Does the LTD12-LX have a heater?
No. The LTD12-LX is unheated. The heated Speedster LTD is the LTD3.
How do I order an LTD12-LX part that is not listed online?
Call us at 763-535-0770 with the item number from the drawing. Our parts desk at 5415 West Broadway, Crystal, MN 55428 has served cleaning equipment owners since 1956.






