CleanMax CM-WAV 1/2 in Conduit Nut X8008N

The CleanMax CM-WAV 1/2 in Conduit Nut (part# X8008N) is the 1/2-inch nut that secures a conduit or strain-relief fitting where the power cord passes into the CM-WAV wide-area vacuum, locking the fitting to the body.

Compatible Models for the Conduit Nut

• CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)

This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear on other Tacony machines; call 763-535-0770 if you would like us to confirm the exact part for your model.

What the Conduit Nut does

This conduit nut threads onto the 1/2-inch cord-entry fitting from inside the body and clamps it tight against the housing wall. That keeps the strain relief or conduit connector fixed so the cord entry stays solid and the internal wiring is protected from movement. It is a small but load-bearing part of the cord-retention system.

Signs the Conduit Nut needs replacing

Replace the conduit nut if it is cross-threaded, corroded, or will no longer tighten so the cord-entry fitting turns or works loose in the body. If the strain relief spins or the cord entry has play even when tightened, the nut may be stripped and should be renewed so the fitting locks solidly again.

Installation and fit

With power disconnected, thread the new X8008N nut onto the cord-entry fitting from inside the body and tighten it so the fitting is locked firmly against the housing. Confirm the cord entry no longer moves before returning the machine to service. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Conduit Nut do on the CleanMax CM-WAV?

It threads onto the 1/2-inch cord-entry fitting and clamps it tight to the body, keeping the strain relief or conduit connector fixed and the wiring protected.

How do I know if my CM-WAV conduit nut needs replacing?

Replace it if it is cross-threaded, corroded, or will not tighten so the cord-entry fitting turns or works loose in the body.

What models is the Conduit Nut (part# X8008N) compatible with?

The Conduit Nut (part# X8008N) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the Conduit Nut (part# X8008N) or get help?

You can add the Conduit Nut (part# X8008N) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.