Nylon Washer B017-2500
$2.99
Genuine CleanMax ZM-500 and ZM-700 nylon washer (part# B017-2500). Spaces and protects a fastened joint. Call 763-535-0770.
The Nylon Washer (part# B017-2500) is a molded nylon washer used in the CleanMax ZM-500 and ZM-700 commercial battery uprights to space, cushion, and protect a fastened joint. Nylon is chosen where a low-friction, non-marring, non-conductive spacer is needed rather than a steel washer.
Compatible Models for the ZM-500/ZM-700 Nylon Washer
This is a genuine Tacony OEM part for the CleanMax ZM-500 and ZM-700 commercial battery uprights. Call 763-535-0770 if you are unsure which model you have and we will confirm the correct part before you order.
What the ZM-500/ZM-700 Nylon Washer does
The nylon washer sits under a fastener or between two parts to distribute clamping load, set correct spacing, and let the parts move or seat without metal-on-metal contact. Nylon adds a slight cushion, resists corrosion, will not scratch mating surfaces, and does not conduct — useful around plastic housings and pivots. Though small, it keeps its joint quiet, correctly spaced, and free of wear; a missing or crushed washer lets the joint loosen or bind.
Signs the ZM-500/ZM-700 Nylon Washer needs replacing
Replace the nylon washer if it is cracked, flattened, split, or missing, or if the joint it supports has become loose, noisy, or is wearing because the washer is gone. Any time you service the joint it sits in, fit a fresh washer rather than reusing a compressed one.
Installation and fit
Power down the machine. Reassemble the joint with the new nylon washer in the same position the original occupied, and tighten the fastener to seat the parts without over-crushing the washer. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Nylon Washer do on the CleanMax ZM-500 and ZM-700?
It spaces, cushions, and protects a fastened joint — distributing clamping load and preventing metal-on-metal contact with a low-friction, non-marring, non-conductive nylon spacer.
How do I know if my ZM-500/ZM-700 Nylon Washer needs replacing?
Replace it if it is cracked, flattened, split, or missing, or if the joint it supports has become loose, noisy, or is wearing. Fit a fresh one whenever you service that joint.
What models is the Nylon Washer (part# B017-2500) compatible with?
It fits the CleanMax ZM-500 and ZM-700 commercial battery uprights. Call 763-535-0770 to confirm fit for your machine.
How do I order the Nylon Washer (part# B017-2500) or get help?
You can add the Nylon Washer (part# B017-2500) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
