Screw #10-32 x 1-5/8 A432-0705

Compatible with 36 models from 4 Tacony brands (Tornado, Riccar, Simplicity and Powr-Flite), the #10-32 x 1-5/8″ Screw (part# A432-0705) is a genuine Tacony OEM component. Made by Tacony, the A432-0705 is used across Tornado, Riccar, Simplicity and Powr-Flite models — see the full Compatible Models list below.

On these uprights, this long #10-32 screw reaches through thicker assemblies to clamp components such as housings and brackets together. Part# A432-0705 provides the correct thread and 1-5/8-inch length so deep joints pull up tight and stay secure through commercial-duty vibration.

Replace the screw if it is stripped, bent, cross-threaded, or rusted, or if one is lost during a repair. Using the correct long screw avoids stripping threads and keeps a deep joint properly clamped. Spares are handy for any teardown that reaches these fasteners.

Compatible Models for the #10-32 x 1-5/8″ Screw

Part# A432-0705 is a genuine Tacony component shared across multiple brands. It is confirmed compatible with the following models:

• Tornado: Roam 97300, TV280, Roam 97300C
• Riccar: R10CV, R10D, R10E, R10P, R10S, R10SAND, R17, RSL1, RSL1A, RSL1AC, RSL3, RSL3C, RSL4, RSL5, RSL5C
• Simplicity: S10CV, S10D, S10E, S10P, S10S, S10SAND, SC10CV, F3100, F3300, F3300C, F3400, F3500, F3500C, F3600, F3700, F3700C
• Powr-Flite: PF61EC-N, Solar PV030-W12-U

Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and the #10-32 x 1-5/8″ Screw (part# A432-0705) ships from our shop at 5415 West Broadway, Crystal, MN 55428. Browse the complete Tornado Roam 97300 / 97300C parts catalog for matching components, or view the machine on the manufacturer’s site at tornadovac.com.

Frequently Asked Questions

What is the #10-32 x 1-5/8″ screw used for?

The screw (part# A432-0705) is a long #10-32 machine screw used to fasten the larger components of the machine together, and its extra length lets it reach through thicker housing stack-ups where a short screw would not bite. It is a load-bearing fastener, not a trim screw.

Is this screw sold individually?

Yes — it is available on its own, so a stripped or lost screw is a quick, low-cost replacement without buying a hardware kit. Its length and #10-32 thread are why it is listed as a distinct part.

Can I substitute a shorter screw?

Not reliably: the 1-5/8″ length is chosen to reach through the components it clamps, so a shorter screw may not engage enough thread to hold. Match the A432-0705 to keep the joint secure.

Which vacuums use the #10-32 x 1-5/8″ screw (part# A432-0705)?

It fits the Tornado Roam 97300 and 97300C and is shared across Tacony uprights that use the same fastener — see the Compatible Models list above.

Questions about the #10-32 x 1-5/8″ Screw (part# A432-0705)? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.