Agitator Bearing Holder With Edge Brushes Clamping Design B013-1500

The Brushroll Bearing Holder (part# B013-1500) is a shared Tacony OEM part found on 22 models from 4 Tacony brands (Tornado, Riccar, Simplicity and CleanMax). Made by Tacony, the B013-1500 is used across Tornado, Riccar, Simplicity and CleanMax models — see the full Compatible Models list below.

On the Tornado Roam / 97300 / 97300C, the brushroll (agitator) rides on bearings at each end, and the bearing holder locates that bearing in the nozzle so the brush spins true and stays aligned with the belt. A solid holder keeps the brushroll at the right height and angle for even carpet agitation.

Replace the bearing holder if it is cracked, worn, or no longer gripping the bearing, or if the brushroll has developed play, noise, or drag at that end. A failing holder lets the brush wobble, throws off belt tracking, and accelerates bearing and belt wear. Renew it with the bearing for a smooth-running agitator.

Compatible Models for the Brushroll Bearing Holder

Part# B013-1500 is a genuine Tacony component shared across multiple brands. This part is confirmed to fit the following models:

• Tornado: Roam 97300, Roam 97300C
• Riccar: R10CV, R10D, R10P, R10S, R10SAND, R17, R50TAP, PRIMAP, RSL5, RSL5C
• Simplicity: S10CV, S10D, S10P, S10SAND, SC10CV, WONDERP, F3700, F3700C
• CleanMax: Zoom ZM-700, Zoom ZM-800

Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and the Brushroll Bearing Holder (part# B013-1500) ships from our shop at 5415 West Broadway, Crystal, MN 55428. Browse the complete Tornado Roam 97300 / 97300C parts catalog for matching components, or view the machine on the manufacturer’s site at tornadovac.com.

Frequently Asked Questions

What is the role of the brushroll bearing holder?

The brushroll bearing holder (part# B013-1500) is the end fitting that carries the brushroll bearing and keeps the roller centered so it spins true against the carpet. Its edge-brush clamping design also anchors the end of the brush strips so they cannot creep out of the roller.

What happens if I keep running a cracked bearing holder?

A cracked holder lets the bearing shift, so the brushroll starts to wobble, wears its brushes unevenly and can rub the nozzle housing. Catching it early and swapping the holder saves the more expensive brushroll and bearing from being damaged.

Does the bearing holder fit both the 97300 and the 97300C?

Yes — the same B013-1500 holder is used on both the Tornado Roam 97300 and 97300C, and on the Riccar, Simplicity and CleanMax uprights that share this agitator, so one part covers the whole family (see the Compatible Models list above).

Does the correct bearing holder improve cleaning performance?

It does indirectly: by holding the bearing square and clamping the brush strips, it keeps the brushroll spinning true and evenly loaded, which is what lets the agitator groom carpet consistently across its full width.

Questions about the Brushroll Bearing Holder (part# B013-1500)? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.