Screw Non-Pulley End 40mm A733-1800

Used across Tornado, Riccar and Simplicity machines, the Non-Pulley End Screw (40 mm) (part# A733-1800) is a genuine Tacony OEM part. This is a shared Tacony OEM part fitted across Tornado, Riccar and Simplicity models — see the full Compatible Models list below.

On these agitators, the brushroll and its end supports are held with long through-screws, and this 40 mm screw fastens the end opposite the belt pulley. Part# A733-1800 provides the correct length and thread to clamp the brushroll end cap and bearing holder securely so the agitator runs true.

Replace this screw if it is stripped, bent, cross-threaded, or rusted, or if you are rebuilding the brushroll and want fresh hardware. A worn end screw can loosen and let the brushroll end shift, causing wobble, noise, and belt-tracking problems. It is inexpensive insurance during any agitator service.

Compatible Models for the Non-Pulley End Screw (40 mm)

Part# A733-1800 is a genuine Tacony component shared across multiple brands. Confirmed fitment includes the following models:

• Tornado: Roam 97300, Roam 97300C
• Riccar: R10CV, R10D, R10P, R10S, R10SAND, R17, R25D, R25P, R27CV, R27P, R30, R30D, R30P, R30PET, R40, R40P, PRIMAP, Impeccable, Brilliance Deluxe, Brilliance Premium, Brilliance Standard
• Simplicity: F3700, F3700C, Synergy, Moxie
• CleanMax: Zoom ZM-600

Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and the Non-Pulley End Screw (40 mm) (part# A733-1800) ships from our shop at 5415 West Broadway, Crystal, MN 55428. Browse the complete Tornado Roam 97300 / 97300C parts catalog for matching components, or view the machine on the manufacturer’s site at tornadovac.com.

Frequently Asked Questions

What does the 40 mm non-pulley-end screw hold together?

The 40 mm screw (part# A733-1800) is the shorter through-screw that clamps the non-pulley end of the brushroll, capturing the end cap and bearing on that side. It is shorter than the 80 mm pulley-end screw because that end has a shallower stack to reach through.

How do I make sure I order the right agitator screw?

Match the length to the end you are servicing: this 40 mm A733-1800 is for the plain (non-pulley) end, while the pulley end uses the longer 80 mm screw. Fitting the short screw where the long one belongs will leave the clamp loose.

Can I replace the non-pulley-end screw myself?

Yes — it backs out with a screwdriver once the brushroll is removed, making it a simple DIY item to renew if the head is stripped or the threads are worn. It is cheap insurance to fit a fresh one whenever you rebuild the roller.

Which vacuums use the 40 mm non-pulley-end screw (part# A733-1800)?

It fits the Tornado Roam 97300 and 97300C and the shared Riccar, Simplicity and CleanMax platform uprights detailed in the Compatible Models list above.

Questions about the Non-Pulley End Screw (40 mm) (part# A733-1800)? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.