CleanMax CM-WAV 10-32 x 1/2 in Screw 16142B
$2.99
Genuine Tacony CleanMax CM-WAV #10-32 x 1/2-inch screw (part# 16142B) — fine-thread machine screw. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV 10-32 x 1/2 in Screw (part# 16142B) is a #10-32 machine screw, 1/2 inch long, used on the CM-WAV wide-area vacuum at joints sized for the fine #10-32 thread.
Compatible Models for the 10-32 x 1/2 in Screw
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear elsewhere on the machine and on other Tacony models; call 763-535-0770 to confirm the exact part and its position on your machine.
What the 10-32 x 1/2 in Screw does
The #10-32 is the fine-thread version of the machine’s common #10 fastener size, giving a stronger hold in metal than a coarse thread of the same diameter. This 1/2-inch screw pairs with the machine’s #10-32 nuts and threaded bosses to clamp covers, brackets, and mounts that suit that size.
Signs the 10-32 x 1/2 in Screw needs replacing
Replace this screw if the #10-32 thread is stripped, the drive is chewed, or it is corroded so it no longer clamps its joint. A screw that spins without tightening has lost its thread and should be renewed with the same #10-32 x 1/2-inch size, matched to its #10-32 nut or boss.
Installation and fit
Thread the new 16142B screw straight into its #10-32 hole and tighten to secure the joint. Match it to a #10-32 nut or boss — do not force a #10-32 screw into a #10-24 coarse thread or vice versa. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the 10-32 x 1/2 in Screw do on the CleanMax CM-WAV?
It is a fine-thread #10-32 machine screw that clamps covers, brackets, and mounts at joints sized for #10-32, pairing with the machine’s #10-32 nuts and bosses.
How do I know if my CM-WAV 10-32 screw needs replacing?
Replace it if the thread is stripped, the drive is chewed, or it is corroded so it spins without tightening. Be sure to match #10-32 (fine) rather than #10-24 (coarse).
What models is the 10-32 x 1/2 in Screw (part# 16142B) compatible with?
The 10-32 x 1/2 in Screw (part# 16142B) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the 10-32 x 1/2 in Screw (part# 16142B) or get help?
You can add the 10-32 x 1/2 in Screw (part# 16142B) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
