Brush Adjuster 000990305
$7.40
The Lindhaus brush adjuster (part# 000990305) is a genuine OEM part that sets the brush-roll height on a wide range of Lindhaus power nozzles. The Lindhaus brush adjuster lets the agitator sit at the correct depth for each carpet pile or bare floor, so a broken or worn Lindhaus brush adjuster leaves the brush too high to clean or too low to spin freely.
Because it is a shared component, this brush adjuster fits many machines rather than a single model. The Lindhaus brush adjuster works with the height-selector detents; when the plastic wears or the tabs snap, the setting no longer holds and cleaning performance drops. Fitting a new Lindhaus brush adjuster restores accurate height control and full pickup on every surface.
Twin City Vacuum stocks genuine Lindhaus parts and has been selling and servicing Lindhaus equipment since 1956. Browse the full range of Lindhaus vacuum parts, or review model specifications on the manufacturer site at lindhaus.com/us.
Compatible Models for the Brush Adjuster 000990305
This Lindhaus brush adjuster (000990305) is confirmed compatible with the following Lindhaus models:
- Lindhaus Activa
- Lindhaus Aria
- Lindhaus CH Pro
- Lindhaus Diamante
- Lindhaus Diamante Eco-Force
- Lindhaus Dynamic
- Lindhaus Dynamic Eco-Force
- Lindhaus HCP 12″
- Lindhaus HCP 14″
- Lindhaus Valzer
- Lindhaus PB12
- Lindhaus PB12e
- Lindhaus PB14
- Lindhaus PB14e
- Lindhaus RX380 Eco-Force
- Lindhaus RX450 Eco-Force
- Lindhaus RX500 Eco-Force
- Lindhaus RX Hepa
- Lindhaus LW46 Electric
- Lindhaus LW46 Hybrid Dual Core
Replacing the Lindhaus brush adjuster is a quick repair: open the nozzle housing, remove the worn adjuster, and fit the new one into the height mechanism. If the brush still will not set correctly, the brush roll or drive belt may also need attention — our technicians can confirm the right part before you order.
Lindhaus Brush Adjuster 000990305 — Frequently Asked Questions
What does the Lindhaus brush adjuster (000990305) do?
It sets the brush-roll height so the agitator sits at the correct depth for carpet or bare floors, keeping pickup strong without stalling the brush.
How do I know if my brush adjuster needs replacing?
Signs include a height setting that will not hold, a brush that sits too high or too low, poor carpet pickup, or visibly cracked or broken adjuster tabs.
What models is the brush adjuster (part# 000990305) compatible with?
The Lindhaus brush adjuster fits many models, including the Activa, Aria, CH Pro, Diamante, Dynamic, HCP, Valzer, PB and PBe series, RX Eco-Force, RX Hepa, and LW46 nozzles listed above.
How do I order the Lindhaus brush adjuster (part# 000990305) or get help?
You can add the Lindhaus brush adjuster (part# 000990305) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
