CleanMax CM-WAV #10-32 x 3/8 in Screw 03261
$2.99
Genuine Tacony CleanMax CM-WAV #10-32 x 3/8-inch screw (part# 03261) — short screw for a light-duty joint. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV #10-32 x 3/8 in Screw (part# 03261) is a short #10-32 screw, 3/8 inch long, used on the CM-WAV wide-area vacuum to fasten a light-duty joint where only a short reach is needed.
Compatible Models for the #10-32 x 3/8 in Screw
- CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear on other Tacony machines; call 763-535-0770 if you would like us to confirm the exact part for your model.
What the #10-32 x 3/8 in Screw does
This 3/8-inch #10-32 screw is a short fastener for shallow joints — securing a cover, clip, or small bracket where the parts being clamped are thin and a longer screw would bottom out or protrude. Its #10-32 thread matches the machine’s common small-fastener size, so it pairs with the #10-32 nuts and threaded bosses used across the CM-WAV.
Signs the #10-32 x 3/8 in Screw needs replacing
Replace this screw if its threads or drive recess are stripped, it is corroded, or it no longer holds so its part works loose. A short screw that spins without tightening, or whose head is chewed so it cannot be driven, should be renewed with the correct #10-32 x 3/8-inch size rather than substituting a longer screw that could protrude or foul.
Installation and fit
Start the new 03261 screw straight into its hole to follow the original thread, and tighten until the part is held firmly without stripping the hole. Use the correct 3/8-inch length so it does not bottom out or stick through. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the #10-32 x 3/8 in Screw do on the CleanMax CM-WAV?
It fastens a shallow, light-duty joint — a cover, clip or small bracket — where only a short #10-32 screw is needed.
How do I know if my CM-WAV #10-32 x 3/8 screw needs replacing?
Replace it if the threads or drive recess are stripped, it is corroded, or it spins without holding so its part works loose. Use the correct 3/8-inch length.
What models is the #10-32 x 3/8 in Screw (part# 03261) compatible with?
The #10-32 x 3/8 in Screw (part# 03261) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the #10-32 x 3/8 in Screw (part# 03261) or get help?
You can add the #10-32 x 3/8 in Screw (part# 03261) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
