Genuine Tacony CleanMax CM-WAV 1/4-20 x 5/16-inch set screw (part# 02011) — locks a component to a shaft. Fits the CleanMax CM-WAV. In stock, Crystal MN. Call 763-535-0770.
The CleanMax CM-WAV 1/4-20 x 5/16 in Set Screw (part# 02011) is a 1/4-20 set screw, 5/16 inch long, used on the CM-WAV wide-area vacuum to lock a component to a shaft or fix its position.
Compatible Models for the 1/4-20 x 5/16 in Set Screw
CleanMax CM-WAV Wide Area Vacuum (wide-track commercial upright)
This is a genuine Tacony hardware item used on the CleanMax CM-WAV. The same size fastener may appear elsewhere on the machine and on other Tacony models; call 763-535-0770 to confirm the exact part and its position on your machine.
What the 1/4-20 x 5/16 in Set Screw does
Unlike a through-bolt, a set screw threads through one part and its tip bears against a shaft or mating surface to lock the parts together — fixing a hub, collar, or knob so it cannot rotate or slide. On the CM-WAV this short 1/4-20 set screw pins a component in place where a clamping bolt is not used.
Signs the 1/4-20 x 5/16 in Set Screw needs replacing
Replace the set screw if its tip is mushroomed or worn so it no longer bites, if the drive socket is stripped, or if the part it locks has started to slip on its shaft. A hub or collar that rotates or walks on its shaft despite the set screw being tight usually means the screw tip or socket is worn and it should be renewed.
Installation and fit
Thread the new 02011 set screw into its hole and tighten it so its tip seats firmly against the shaft or flat, locking the component. Where a flat or detent exists on the shaft, seat the tip on it for the most secure hold. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the 1/4-20 x 5/16 in Set Screw do on the CleanMax CM-WAV?
Its tip bears against a shaft or mating surface to lock a hub, collar, or knob in position so it cannot rotate or slide.
How do I know if my CM-WAV set screw needs replacing?
Replace it if the tip is worn or mushroomed so it no longer bites, the drive socket is stripped, or the part it locks slips on its shaft despite being tight.
What models is the 1/4-20 x 5/16 in Set Screw (part# 02011) compatible with?
The 1/4-20 x 5/16 in Set Screw (part# 02011) is listed for the CleanMax CM-WAV wide-area commercial upright. If you run a different CleanMax model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the 1/4-20 x 5/16 in Set Screw (part# 02011) or get help?
You can add the 1/4-20 x 5/16 in Set Screw (part# 02011) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CM-WAV.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
