CleanMax Nitro CMNR-QD Baseplate B283-0042
$15.99
Genuine CleanMax Nitro CMNR-QD baseplate (part# B283-0042). Forms the bottom of the nozzle and sets brushroll clearance. Call 763-535-0770.
The Nitro CMNR-QD Baseplate (part# B283-0042) is the bottom plate of the nozzle housing on the CleanMax Nitro commercial upright — the part that rides against the floor, encloses the brushroll, and forms the suction inlet the machine cleans through. It is one of the most abrasion-exposed parts on the whole vacuum.
Compatible Models for the Nitro CMNR-QD Baseplate
This is a genuine Tacony OEM part built for the CleanMax Nitro CMNR-QD. CleanMax shares many components across its commercial upright range, so if you run a related CleanMax commercial model, call 763-535-0770 and we will confirm fit before you order.
What the Nitro CMNR-QD Baseplate does
The baseplate creates the floor-facing opening where the brushroll agitates the carpet and the airflow lifts the loosened dirt into the machine. Its shape and the height it holds the nozzle at set the brushroll-to-floor clearance, which directly controls how well the vacuum grooms carpet and how much airflow reaches the inlet. It also protects the brushroll and belt from below and provides the mounting for the baseplate hardware. On commercial carpet, the plate is dragged over miles of fiber and grit, so it is a genuine wear part.
Signs the Nitro CMNR-QD Baseplate needs replacing
Replace the baseplate if it is cracked, badly gouged or worn thin, or if the brushroll opening edges are chewed up so the roller no longer contacts the carpet evenly. Poor pickup, visible scratching of hard floors, a brushroll that bogs or rubs, or broken mounting points are all reasons to replace it. A warped plate that no longer sits flat on the floor will leak air and lose suction.
Installation and fit
Unplug the machine and lay it back to expose the nozzle underside. Remove the baseplate screws, lift the old plate off around the brushroll, then fit the new plate, reinstall the hardware evenly, and spin the brushroll by hand to confirm it turns freely with correct clearance. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the Baseplate do on the CleanMax Nitro CMNR-QD?
It forms the bottom of the nozzle, encloses the brushroll, creates the suction inlet at the floor, and sets the brushroll-to-carpet clearance that controls grooming and airflow.
How do I know if my Nitro CMNR-QD Baseplate needs replacing?
Replace it if it is cracked, worn thin, gouged, or warped so it no longer sits flat, or if the brushroll opening is chewed up. Poor pickup and floor scratching are common signs.
What models is the Baseplate (part# B283-0042) compatible with?
It is the genuine baseplate for the CleanMax Nitro CMNR-QD commercial upright. Call 763-535-0770 to confirm fit on a related CleanMax model.
How do I order the Baseplate (part# B283-0042) or get help?
You can add the Baseplate (part# B283-0042) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
