Lock Spring 29mm X1206

The Lock Spring (part# X1206) is a 29 mm by 12 mm OD lock spring on the CMBP-6CL cordless backpack vacuum that holds a latch or component under tension so it stays locked.

Compatible Models for the Lock Spring

• Tornado Pac-Vac 6 Roam — Models 93016, 93016B-1 and 93016C-1
• CleanMax CMBP-6CL Cordless Lithium Backpack Vacuum

What the Lock Spring does

This lock spring, 29 mm long with a 12 mm outside diameter, supplies the tension that keeps a latch or catch engaged on the CMBP-6CL. It presses the locking element into its holding position and returns it after it is released, so a cover, battery latch, or mechanism stays secured during use and can be freed when needed.

Signs the Lock Spring needs replacing

Replace the lock spring if it is fatigued, distorted, corroded, or broken so it no longer holds its latch under tension. A latch that no longer stays locked, feels loose, or does not snap back to the locked position points to a worn lock spring that should be renewed with the correct 29 mm size.

Installation and fit

Note how the old spring is seated, remove it, and fit the new X1206 lock spring in the same position so it tensions the latch in the correct direction. Confirm the latch locks and releases properly before use. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the Lock Spring do on a cordless backpack vacuum?

It supplies the tension that keeps a latch or catch engaged, pressing the locking element into its holding position and returning it after release.

How do I know if my lock spring needs replacing?

Replace it if it is fatigued, distorted, corroded or broken so a latch no longer stays locked, feels loose, or will not snap back to the locked position.

What models is the Lock Spring (part# X1206) compatible with?

The Tornado Pac-Vac 6 Roam in all three revisions (Models 93016, 93016B-1 and 93016C-1) and the CleanMax CMBP-6CL cordless lithium backpack vacuum.

How do I order the Lock Spring (part# X1206) or get help?

You can add the Lock Spring (part# X1206) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CMBP-6CL.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.