0-ring 010260307

The Lindhaus o-ring (part# 010260307) is a genuine Lindhaus sealing ring used inside the body of a wide range of Lindhaus vacuums. This small rubber Lindhaus o-ring creates an airtight seal between mating parts so the machine holds its suction and nothing works loose in service. It is one of the least expensive parts on the machine, but a hardened or split o-ring is a common hidden cause of lost suction and rattles, which makes it a smart part to replace whenever you have the body open.

Because the same seal is fitted to so many Lindhaus models, this seal is a high-turnover item for us. It is an original equipment seal, so it matches the factory diameter, thickness, and rubber compound exactly rather than approximating them.

What the Lindhaus o-ring does

The Lindhaus o-ring seals a joint inside the machine to keep the air path closed and the assembly tight. Over time rubber seals dry out, take a set, or crack, and once the seal is gone the machine can lose suction or develop a vibration. Fitting a fresh o-ring restores the seal and is far cheaper than chasing the same symptom through larger assemblies.

Signs your Lindhaus o-ring needs replacing

Reduced suction, a new rattle, or a visible crack or flattening on the old ring all mean it is time to replace it. Any time you have a Lindhaus body apart for other service, swapping the Lindhaus o-ring is cheap insurance. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. See the full Lindhaus vacuum parts range for related seals and body parts, or view the machines on the official Lindhaus site.

Compatible Models for the Lindhaus o-ring

• Lindhaus CH Pro
• Lindhaus CH Pro Eco-Force
• Lindhaus HCP 12"
• Lindhaus HCP 14"
• Lindhaus HF6
• Lindhaus RX Hepa
• Lindhaus RX380 Eco-Force
• Lindhaus RX450 Eco-Force
• Lindhaus RX500 Eco-Force
• Lindhaus Valzer

Frequently Asked Questions About the Lindhaus o-ring

What does the Lindhaus o-ring (part# 010260307) do?

It seals a joint inside the machine body to keep the air path airtight and hold mating parts tight so the vacuum maintains full suction.

How do I know if my Lindhaus o-ring needs replacing?

Lost suction, a new rattle, or a cracked, hardened, or flattened ring are the usual signs the o-ring (part# 010260307) has failed.

What models is the Lindhaus o-ring (part# 010260307) compatible with?

It fits the Lindhaus CH Pro, CH Pro Eco-Force, HCP 12″, HCP 14″, HF6, RX Hepa, RX380/RX450/RX500 Eco-Force, and Valzer.

How do I order the Lindhaus o-ring (part# 010260307) or get help?

You can add the Lindhaus o-ring (part# 010260307) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.