Lindhaus LS50 Electric – Wires + Connector Vac Motor (Electric) – 024580028

The Lindhaus LS50 motor wires, part number 024580028, are the wiring harness and connector that carry power to the vacuum motor of your LS50 Electric upright.

When to replace the Lindhaus LS50 motor wires

This harness delivers current to the suction motor and plugs it into the rest of the electrical system. Clean, intact wiring and a solid connector are essential for the motor to receive the steady power it needs to run at full strength.

Replace the motor wires if the vacuum motor runs intermittently or cuts out, if you see melted, discolored, or frayed insulation, if the connector is loose or corroded, or if there is a burnt smell near the motor. Wiring that only makes contact when it is moved, and a motor that will not start despite a good control board and switch, both point to a failing harness or connector.

Replacing the harness is internal electrical work. With the vacuum unplugged, the housing is opened, the old wires are unplugged from the motor and the connector, and the new 024580028 assembly is routed and connected in exactly the same way. Because it involves the motor wiring, many owners have our service department perform this repair.

Twin City Vacuum supplies the genuine 024580028 wires and connector so the gauge, length, and connector fit match your LS50 Electric, which matters on a power-carrying part where a poor connection can overheat. The correct harness restores a clean, reliable feed to the motor rather than an intermittent one.

Installing fresh Lindhaus LS50 motor wires clears up flaky, cutting-out behavior and gets steady power flowing to the suction motor again.

Compatible Models

• Lindhaus LS50 Electric

Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse more Lindhaus LS50 parts or explore the full lineup at Lindhaus.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Frequently Asked Questions

What do the Lindhaus LS50 motor wires do?

The motor wires, part number 024580028, are the harness and connector that carry power to the suction motor of the LS50 Electric and plug it into the electrical system.

How do I know my LS50 motor wires need replacing?

Replace them if the motor runs intermittently or cuts out, the insulation is melted or frayed, the connector is loose or corroded, or there is a burnt smell near the motor.

What models and part number do these motor wires fit?

This is Lindhaus part number 024580028 and it fits the Lindhaus LS50 Electric upright vacuum.

How do I order the Lindhaus LS50 motor wires?

To order the Wires and Connector for Vacuum Motor, part number 024580028, add it to your cart on this page, or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has served Lindhaus owners since 1956.