#6 SAE Flat Washer 01575

The #6 SAE Flat Washer (part# 01575) is a #6 SAE flat zinc washer used on the CMBP-6.2 commercial backpack vacuum; two are required per latch, backing the latch fasteners.

Compatible Models for the #6 SAE Flat Washer

• Tornado Pac-Vac 6 Roam — Models 93016, 93016B-1 and 93016C-1
• CleanMax CMBP-6.2 Commercial Backpack Vacuum (6.2-quart, corded)

This is a genuine Tacony hardware item used on the CleanMax CMBP-6.2. Call 763-535-0770 to confirm the exact part and its position for your machine.

What the #6 SAE Flat Washer does

This #6 SAE flat zinc washer sits under the latch fasteners, spreading their load over the molded latch mount so the fasteners do not pull through or crack the plastic. Two are used per latch on the CMBP-6.2, and the zinc plating resists corrosion at these frequently-worked latch points.

Signs the #6 SAE Flat Washer needs replacing

Replace the washers if they are dished, corroded, or worn so they no longer sit flat, or if they are missing so a latch fastener is bearing directly on the plastic. A latch mount where the fastener head has begun to sink into the plastic, or a cracked mount, points to missing or failed washers that should be renewed as a pair.

Installation and fit

Place the new 01575 washers (two per latch) under the latch fasteners against the mount, then tighten so the load spreads evenly. Ensure each washer sits flat and fully under the fastener head. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the #6 SAE Flat Washer do on a backpack vacuum?

It backs the latch fasteners, spreading their load over the molded latch mount so they do not pull through or crack the plastic. Two are used per latch.

How do I know if my #6 washers need replacing?

Replace them if they are dished, corroded, or worn so they will not sit flat, or if they are missing so a latch fastener bears directly on the plastic.

What models is the #6 SAE Flat Washer (part# 01575) compatible with?

The Tornado Pac-Vac 6 Roam (93016, 93016B-1, 93016C-1), the Tornado Marathon carpet rinser/dryers 98172 and 98175, and the Tornado 17-inch and 20-inch Bi-Speed Scrub/Buff machines 98473, 98473C and 98480.

How do I order the #6 SAE Flat Washer (part# 01575) or get help?

You can add the #6 SAE Flat Washer (part# 01575) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your CMBP-6.2.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.