Bag Holder B338-50B4

$2.99

Genuine OEM bag holder (part# B338-50B4) for Simplicity and Riccar vacuums: the holder inside the bag compartment that the bag collar slides onto, positioning the bag against the inlet. Fits the Simplicity Wonder and Riccar Prima canisters and the other Simplicity and Riccar models listed below. Not sure it fits your model? Call us at 763-535-0770.

SKU: B338-50B4 Categories: , Tag: Brand: ,

The Bag Holder B338-50B4 is a genuine OEM part shared by Simplicity and Riccar vacuums: the holder inside the bag compartment that the bag collar slides onto, positioning the bag against the inlet. One part number fits the Simplicity Wonder (WONDER.2, WONDER.4SS, WONDERP.2, WONDERP.CPN, WONDERP.FSN, WONDERP.TAD, WONDERP.TAP) and the Riccar Prima (PRIMA.2, PRIMA.4SS, PRIMAP.2, PRIMAP.CPN, PRIMAP.FSN, PRIMAP.TAD, PRIMAP.TAP), R50FSN, R50SS and R50TAP.

Compatible Models

Simplicity

Riccar

  • Riccar Prima (PRIMA.2, PRIMA.4SS, PRIMAP.2, PRIMAP.CPN, PRIMAP.FSN, PRIMAP.TAD, PRIMAP.TAP)
  • Riccar R50FSN
  • Riccar R50SS
  • Riccar R50TAP

The same part fits every model listed above, Simplicity and Riccar alike, so you do not need a different version for each brand. If your model is not shown, call us at 763-535-0770 with the model number from the label on the machine and we will help you find the right part.

What the Bag Holder Does

It is the holder inside the bag compartment that the bag collar slides onto, positioning the bag against the inlet. When it is worn or damaged, the problem usually shows up as lost suction, a rattle or a part that no longer works the way it did when the vacuum was new, and replacing it brings the machine back to how it left the factory.

When to Replace the Bag Holder

Replace it when it is cracked, the bag will not stay on it, or dust packs in the compartment outside the bag. Replacing a small worn part early is far cheaper than living with lost suction or waiting until it damages something more expensive.

Tips and Ordering

Check the two bag holder springs (B338-6500) at the same time. See exactly where it fits on our Simplicity Wonder parts diagram, or browse the Simplicity parts index. Owner manuals are at simplicityvac.com. Twin City Vacuum in Crystal, Minnesota has sold and serviced vacuums since 1956, and our repair shop can install the part for you.

Frequently Asked Questions

What does the Bag Holder (B338-50B4) do?

It is the holder inside the bag compartment that the bag collar slides onto, positioning the bag against the inlet.

How do I know the Bag Holder needs replacing?

Replace it when it is cracked, the bag will not stay on it, or dust packs in the compartment outside the bag.

Which vacuums does the Bag Holder (B338-50B4) fit?

It fits Simplicity and Riccar vacuums: the Simplicity Wonder (WONDER.2, WONDER.4SS, WONDERP.2, WONDERP.CPN, WONDERP.FSN, WONDERP.TAD, WONDERP.TAP) and the Riccar Prima (PRIMA.2, PRIMA.4SS, PRIMAP.2, PRIMAP.CPN, PRIMAP.FSN, PRIMAP.TAD, PRIMAP.TAP), R50FSN, R50SS and R50TAP.

How do I order the Bag Holder (B338-50B4) or get help?

Add the Bag Holder (B338-50B4) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing vacuums since 1956 and can help you find the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Bag Holder B338-50B4”

Your email address will not be published. Required fields are marked *