Brush Base Housing Assembly 39328

The Brush Base Housing Assembly (part# 39328) is a genuine Tacony OEM replacement part that forms the molded outer shell of the brush base on the Tornado CK 14/1 line. It is the large housing that carries the printed True-HEPA filtration panel, wraps around the brush roll and motor pocket, and anchors the base plate — holding the whole nozzle square so airflow is channelled cleanly from the floor up into the machine.

Compatible Models for the Brush Base Housing Assembly

• Tornado CK 14/1 BSE — Model 98145
• Tornado CK 14/1 Pro — Model 98147
• Tornado CK 14/1 QD — Model 98174

Made from impact-molded ABS, the housing takes the brunt of curb strikes and furniture bumps, so its most common failures are cracked corners, a snapped screw boss that leaves the base rattling, or a warped edge that no longer meets the base plate. When that seal is lost, suction bleeds out at the seam and the brush roll can rub the shell instead of the carpet. Fitting a fresh 39328 restores the rigid, sealed nozzle the machine was built with.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956 and stocks genuine Tacony parts, so this housing matches the original mounting points, screw pattern, and filtration label exactly. Need the rest of the base? Browse the full Tornado CK 14/1 Pro parts and accessories, and see genuine Tornado listings at tornadovac.com.

Frequently Asked Questions

What does the Brush Base Housing Assembly (part# 39328) do?

The Brush Base Housing Assembly (part# 39328) is the molded outer shell of the brush base — it carries the True-HEPA filtration label, encloses the brush roll and motor area, and gives the nozzle its rigid shape so the base tracks flat across the floor while directing airflow up into the vacuum.

How do I know if the 39328 housing needs replacing?

Replace the housing if it is cracked, has a broken mounting boss, rattles because a screw post has snapped, or no longer seats tightly against the base plate. A damaged housing lets the nozzle flex, leaks suction at the seams, and can let the brush roll rub where it should not.

Is the Brush Base Housing Assembly hard to install?

It is a moderate repair. The base is separated from the handle, the brush roll and belt are lifted out, and the parts are transferred into the new housing before it is reassembled and the screws are torqued back down. Most techs allow 20–30 minutes.

Which models does the 39328 housing fit, and how do I order it?

The 39328 Brush Base Housing Assembly fits three Tornado CK 14/1 machines: the CK 14/1 Pro (98147), the CK 14/1 BSE (98145), and the CK 14/1 QD (98174). Add it directly to your cart on this page, or call 763-535-0770 — our staff at 5415 West Broadway, Crystal, MN 55428 has serviced Tornado equipment since 1956 and can confirm the right housing for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.