Brush Drive Mount Ring 21305030
$5.99
Genuine OEM brush drive mount ring (part# 21305030) for Tornado disc scrubbers – fits the BDSO 20/21 stand-on and the 99617 BD 17/6 automatic scrubber. The ring that locates the drive hub in the brush base.
The brush drive mount ring (part# 21305030) locates and retains the brush drive hub where it sits in the base on Tornado disc scrubbers. It is a small, inexpensive part doing a precise job: holding the drive assembly square in its housing so the pad driver spins true and the load from a disc under 48.5 pounds of down pressure stays centred rather than working the hub sideways in its bore.
Mount rings fail from fatigue and from being disturbed. The common pattern is a ring that has been reused through several brush rebuilds, has lost its spring, and no longer grips – which allows the hub a few thousandths of movement that quickly becomes a rhythmic knock as the disc turns. Operators describe it as a tick or a tapping that keeps time with brush speed and gets worse under load. A ring that has been nicked or deformed during a previous disassembly can also sit proud, which stops the hub seating fully and puts the disc out of plane – visible as uneven pad wear across the face.
Because it is a low-cost item that protects expensive parts, treat this ring as a one-use component: replace it any time the brush drive comes apart rather than refitting the old one. Make sure it is fully seated in its groove before the hub goes back, and turn the disc by hand to confirm there is no play before putting the machine back in service.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE
- Tornado 99617 BD 17/6 Automatic Scrubber (both serial ranges)
Call 763-535-0770 with your model and serial number and we will confirm the ring against your parts book. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Brush Drive Mount Ring FAQ
What does the brush drive mount ring do?
It locates and retains the brush drive hub in the base so the pad driver spins true and the load from the disc stays centred in its bore.
How do I know if the brush drive mount ring (part# 21305030) needs replacing?
A tick or knock that keeps time with brush speed and worsens under load, perceptible play in the drive hub, or a ring that is nicked, flattened or no longer springs into its groove.
What models is the brush drive mount ring (part# 21305030) compatible with?
It fits the Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado 99617 BD 17/6 automatic scrubber in both serial ranges.
How do I order the brush drive mount ring (part# 21305030) or get help?
You can add the brush drive mount ring (part# 21305030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the brush drive mount ring do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It locates and retains the brush drive hub in the base so the pad driver spins true and the load from the disc stays centred in its bore.”}},{“@type”:”Question”,”name”:”How do I know if the brush drive mount ring (part# 21305030) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A tick or knock that keeps time with brush speed and worsens under load, perceptible play in the drive hub, or a ring that is nicked, flattened or no longer springs into its groove.”}},{“@type”:”Question”,”name”:”What models is the brush drive mount ring (part# 21305030) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It fits the Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado 99617 BD 17/6 automatic scrubber in both serial ranges.”}},{“@type”:”Question”,”name”:”How do I order the brush drive mount ring (part# 21305030) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the brush drive mount ring (part# 21305030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet