Brush Shaft Retaining Washer 60281510
$9.99
Genuine OEM retaining washer (part# 60281510) for Tornado disc scrubbers – fits the BDSO 20/21 stand-on and the 99617 BD 17/6 automatic scrubber. The washer that holds the brush shaft assembly in position.
The retaining washer (part# 60281510) holds the brush shaft assembly in its working position on Tornado disc scrubbers. It takes up end float at the shaft so the disc cannot climb or drop in its bore, spreads the clamping load across the face it bears on instead of concentrating it on a fastener head, and keeps the whole brush drive stack together as a unit when the deck is raised, lowered and bounced over thresholds.
Washers in this position get reused far too often. The failure is gradual: the washer dishes slightly under repeated load, loses the flat face it needs to clamp against, and lets a small amount of end float develop in the shaft. That float shows up as a disc that can be lifted or rocked by hand, a knocking at the start and end of each pass as the drive takes up slack, and accelerated wear in the bushing behind it. A washer that has been run loose will often show a bright fretted ring on one face and may be visibly cupped when laid on a flat surface.
Replace it whenever the brush shaft or bushing is disturbed – it is one of the cheapest parts in the deck and it protects the shaft, the bushing and the bore behind them. Check it on a flat surface before fitting, make sure it seats square, and confirm there is no detectable end float at the shaft once everything is torqued down.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE
- Tornado 99617 BD 17/6 Automatic Scrubber (both serial ranges)
Call 763-535-0770 with your model and serial number for help confirming the washer, bushing and shaft together. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Brush Shaft Retaining Washer FAQ
What does the brush shaft retaining washer do?
It holds the brush shaft assembly in position, takes up end float so the disc cannot move in its bore, and spreads clamping load across the bearing face.
How do I know if the brush shaft retaining washer (part# 60281510) needs replacing?
Detectable end float at the shaft, a knock as the drive takes up slack at the start and end of a pass, a bright fretted ring on one face, or visible cupping when the washer is laid on a flat surface.
What models is the brush shaft retaining washer (part# 60281510) compatible with?
It fits the Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado 99617 BD 17/6 automatic scrubber in both serial ranges.
How do I order the brush shaft retaining washer (part# 60281510) or get help?
You can add the brush shaft retaining washer (part# 60281510) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the brush shaft retaining washer do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It holds the brush shaft assembly in position, takes up end float so the disc cannot move in its bore, and spreads clamping load across the bearing face.”}},{“@type”:”Question”,”name”:”How do I know if the brush shaft retaining washer (part# 60281510) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Detectable end float at the shaft, a knock as the drive takes up slack at the start and end of a pass, a bright fretted ring on one face, or visible cupping when the washer is laid on a flat surface.”}},{“@type”:”Question”,”name”:”What models is the brush shaft retaining washer (part# 60281510) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It fits the Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado 99617 BD 17/6 automatic scrubber in both serial ranges.”}},{“@type”:”Question”,”name”:”How do I order the brush shaft retaining washer (part# 60281510) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the brush shaft retaining washer (part# 60281510) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet