Tornado Burnisher Motor Cover X1458

$24.99

Genuine OEM motor cover (part# X1458) for commercial high-speed burnishers — the shroud that encloses the burnisher motor. Fits Tornado Brute Force burnishers and Powr-Flite P Series machines (see full list below).

SKU: X1458 Category: Brand:

The X1458 is the motor cover fitted over the burnisher motor. It appears on every drawing in the Brute Force book — shown on the Brute Force 1600 (98458B) and on the Brute Force 2000 (98482B) and both Brute Force 2000 Dust Control (98486) drawings — and it is the same cover catalogued for the Powr-Flite P Series burnisher, so it is a genuinely cross-brand part rather than a Tornado-only one.

The cover is not decorative. It keeps the operator away from a motor that runs hot in continuous service, keeps mop water and airborne finish off the motor’s top end, and directs the motor’s own cooling airflow. A burnisher run with the motor cover removed or badly fitted will run hotter than it should, and heat is the main thing that shortens the life of the windings and the bearings underneath.

Replace the X1458 if it is cracked, if the mounting points have broken out, if it is distorted from heat, or if it no longer sits down on its mounting face. Cracks typically start at the fastener holes, and a cover that rattles has usually already lost a fastener or an insert (X1075) behind it. A melted or badly discoloured cover is worth taking as a warning sign in itself: it means the motor has been running hot, so check for a loaded pad, a slipping belt or a blocked airflow path at the same time.

Fit it with the #8-32 hardware the drawing specifies for your machine and tighten by hand at the end rather than running the screws home with a driver. The cover carries no model name because it is shared across the Tornado Brute Force line and the Powr-Flite P Series — match the part number, not the colour of the machine. Call 763-535-0770 with your model and serial number if you want it listed.

Compatible Models

Frequently asked questions

What does the motor cover (part# X1458) do on a burnisher?

It encloses the burnisher motor — keeping the operator away from a hot motor, keeping water and finish dust out of its top end, and directing the motor’s cooling airflow.

How do I know if my X1458 motor cover needs replacing?

Replace it if it is cracked (usually starting at the fastener holes), distorted by heat, missing mounting points, or no longer sitting flush on its mounting face.

My motor cover is discoloured from heat — is that just cosmetic?

Treat it as a symptom. A cover that has run hot enough to discolour means the motor has been running hot, so check for a loaded pad, a slipping belt or blocked cooling airflow as well as replacing the cover.

What models is the motor cover (part# X1458) compatible with?

The Tornado Brute Force 1600 (98458B), Brute Force 2000 (98482B) and Brute Force 2000 Dust Control (98486) burnishers, and Powr-Flite P Series burnishers.

How do I order the motor cover (part# X1458) or get help?

You can add the motor cover (part# X1458) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Tornado Burnisher Motor Cover X1458”

Your email address will not be published. Required fields are marked *