Capacitor, 18uF, Carpet Dryer Motor X1441C

$8.99

Genuine OEM 18uF run capacitor for the carpet dryer motor on commercial air movers and dryers — the matched capacitor for the X1441 motor. Fits Tornado and Powr-Flite models (see the full list below).

On a capacitor-run motor the capacitor is not an accessory, it is part of how the motor makes torque. It shifts the phase of the current in the auxiliary winding so the motor sees a rotating field rather than a pulsing one, and that is what gets the blower turning and keeps it turning under load. An 18uF value is specification for this motor; substituting a different value changes the phase angle and the motor will run hot or lose torque even if it appears to work.

Compatible Models

  • Tornado: 98774 Windshear 3200
  • Powr-Flite: PDS1 Powr-Dryer
  • and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm

Capacitors are also the single most common electrical failure on these dryers, and they fail far more often than the motors they serve. The giveaway symptom is a machine that hums but will not start spinning until you flick the fan wheel by hand, after which it runs more or less normally. A capacitor that has swollen, split, leaked or domed at its end is finished regardless of what the machine does.

Replacing a capacitor is cheap and quick, and it is worth trying before you condemn a motor that costs many times as much. Discharge it before handling — a run capacitor can hold a charge after the machine is unplugged. If the motor still will not start on a known-good capacitor, or if the new capacitor fails quickly, the motor itself is drawing too much and should be replaced as part# X1441-115.2-AL, which comes with a matched capacitor.

Frequently Asked Questions

What does the run capacitor do on a commercial carpet dryer?

The 18uF run capacitor (part# X1441C) shifts the phase of the current in the motor’s auxiliary winding so the motor produces a rotating field, which is what gives it starting and running torque. The 18uF value is matched to the X1441 dryer motor.

How do I know if my run capacitor needs replacing?

The classic sign is a motor that hums but will not start turning until you flick the fan wheel by hand, after which it runs normally. Also replace it if the capacitor body is swollen, domed, split or leaking. Discharge the capacitor before handling it — it can hold a charge after the machine is unplugged.

What models is the capacitor, 18uF, Carpet Dryer Motor (part# X1441C) compatible with?

It fits Tornado 98774 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.

How do I order the capacitor, 18uF, Carpet Dryer Motor (part# X1441C) or get help?

You can add the Capacitor, 18uF, Carpet Dryer Motor (part# X1441C) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.

Reviews

There are no reviews yet

Be the first to review “Capacitor, 18uF, Carpet Dryer Motor X1441C”

Your email address will not be published. Required fields are marked *