Caster Receiver, F5 Axial Fan X9195

$4.99

Genuine OEM caster receiver (part# X9195) for F5-platform axial fan air movers — the flanged socket moulded into the base that the caster stem presses into. Fits Tornado Windshear Sidedraft and Downdraft and the Powr-Flite F6 downdraft dryer; full list below. In stock, ships from Crystal, MN. Call 763-535-0770.

The Caster Receiver, F5 Axial Fan (part# X9195) is a genuine OEM replacement part used on axial-fan air movers from more than one brand. It is the flanged metal socket fitted into the base of the housing; the grip stem of the caster presses into it, and it is what actually carries the machine’s weight on to the wheel.

Compatible Models for the Caster Receiver

The same part is fitted to the 230V export versions of the Windshear Sidedraft and Downdraft (98783 and 98785), which are not sold in the US and which we do not stock.

Replace the receiver when a caster will no longer stay seated, when the socket has been splayed or egged out by a side impact, or when the flange has pulled away from the base. A worn receiver is the usual reason a caster keeps falling out on site even after the caster itself has been renewed — the stem is fine, the hole it grips is not.

Renew the receiver and the caster together where both have seen the same abuse, because a new stem in a worn socket will work loose again within days. The receiver presses into the base from underneath with the machine tipped back. We can confirm which caster pairs with your machine.

Browse the rest of the Tornado Windshear air mover parts or the Windshear 98782 Sidedraft main assembly, and see the manufacturer specifications at tornadovac.com.

Frequently Asked Questions

What does the caster receiver do on an air mover?

It is the socket the caster plugs into. Moulded or pressed into the base of the housing, it grips the caster’s stem and transfers the weight of the machine on to the wheel, so it takes every bump the fan is rolled over.

How do I know if my caster receiver needs replacing?

The giveaway is a caster that will not stay in. Tip the machine and look into the socket: if it is splayed, oval instead of round, or lifting away from the base, the receiver is finished no matter how good the caster is.

What models is the Caster Receiver (part# X9195) compatible with?

It is confirmed on the Tornado Windshear Sidedraft 98782, the Windshear Downdraft 98784 and the Powr-Flite PDF6WRD F6 Downdraft Structural Dryer, plus the 230V export Windshear machines that we do not stock. Note the caster that fits it differs by machine, so order the caster by model.

How do I order the Caster Receiver (part# X9195) or get help?

You can add the Caster Receiver (part# X9195) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Caster Receiver, F5 Axial Fan X9195”

Your email address will not be published. Required fields are marked *