Control Panel Assembly with Switch and Switch Mount X1372A

$13.99

Genuine OEM control panel assembly — panel, speed switch and switch mount supplied together — for commercial carpet dryers and air movers. Fits Tornado and Powr-Flite models (see the full list below).

This is the complete control module rather than a bare faceplate: the moulded panel, the speed switch and the switch mounting bracket come assembled as one serviceable unit. That matters on a repair because the switch has to sit square in the panel for the knob to index properly through its detents; buying the pieces separately and assembling them by hand is where most DIY repairs develop a knob that feels vague or sticks between speeds.

Compatible Models

  • Tornado: 98774 Windshear 3200
  • Powr-Flite: PDS1 Powr-Dryer
  • and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm

The control panel lives in the cutout on the motor-side housing, directly in the path of anything that gets kicked, dropped or dragged across the machine. Typical failures are a cracked panel that lets the switch move in its mount, a switch that has lost one of its speed positions, or scorching around the terminals from a loose spade connector. Any sign of heat discolouration on the panel is a reason to inspect the jumper wire and the switch terminals before putting the machine back into service.

Fitting is straightforward once the housing is open, but take a photo of the wiring before you disturb it. The speed switch is fed by the jumper wire (part# X1431) and the motor leads, and getting a speed tap on the wrong terminal will give you a machine that runs on some settings and not others. If only the switch itself has failed and the panel is sound, the 3-speed switch is available separately as part# X9830; if only the knob is broken, that is part# X1374.

Frequently Asked Questions

What does the control panel assembly do on a commercial carpet dryer?

The control panel assembly (part# X1372A) is the complete control module — the moulded panel, the speed switch and the switch mount supplied together. It holds the switch square in the housing cutout so the knob indexes cleanly through its speed detents, and it carries the switch terminals that the motor speed taps connect to.

How do I know if my control panel assembly needs replacing?

Replace it if the panel is cracked so the switch moves in its mount, if the machine has lost one or more speed settings, if the knob feels vague or sticks between positions, or if there is heat discolouration or scorching around the switch terminals. Burnt terminals mean a loose connection, so inspect the jumper wire (part# X1431) at the same time.

What models is the control Panel Assembly with Switch and Switch Mount (part# X1372A) compatible with?

It fits Tornado 98774 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.

How do I order the control Panel Assembly with Switch and Switch Mount (part# X1372A) or get help?

You can add the Control Panel Assembly with Switch and Switch Mount (part# X1372A) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.

Reviews

There are no reviews yet

Be the first to review “Control Panel Assembly with Switch and Switch Mount X1372A”

Your email address will not be published. Required fields are marked *