Dryer Foot, Tall PD3B
$2.99
Genuine OEM tall rubber dryer foot (part# PD3B) — the moulded foot that carries the weight of Tornado and Powr-Flite carpet dryers and damps vibration; see the fitment list below.
Genuine OEM dryer foot, tall (part# PD3B), for Tornado and Powr-Flite carpet dryers and air movers. This is the moulded rubber foot that the machine actually stands on. It carries the weight of the dryer, isolates the housing from the floor, and absorbs the vibration that an axial or centrifugal fan generates at every speed.
The factory parts drawing calls it the tall dryer foot, which distinguishes it from the shorter feet and from the left and right kickstand feet used elsewhere on the same machines. If you are ordering feet, check which you need — mixing heights will make the machine rock.
Why it wears: a carpet dryer spends its life being set down hard on concrete, dragged across door thresholds and stood in water on a restoration job. The rubber takes the shock every time. Over a few seasons the compound hardens, the contact face goes glassy, and the foot stops doing the one job it has.
When to replace it: if the foot is torn, split at the base or missing entirely; if the rubber has gone hard and shiny rather than matt and grippy; if the machine has started to creep across a smooth floor while running; or if the dryer rocks on a flat surface because one foot has compressed more than the others. A worn foot is not just a comfort item — a machine that walks on a wet floor can pull its own cord taut, and a dryer running hard-mounted onto concrete transmits far more noise and vibration into the structure than one sitting on sound rubber.
Replace them as a set. Fitting one new tall foot alongside three worn ones puts the machine out of level and concentrates load on the new one. The feet cost very little, so doing the whole set is the sensible approach.
If you are replacing feet because the dryer has been dropped, inspect the housing and the kickstand brackets at the same time — those usually take the same impact.
Compatible Models
- Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version)
- Tornado 98778 and 98780
- Powr-Flite PD350, PD500, PDH1 and PDH2 carpet dryers
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Frequently Asked Questions
What does the tall dryer foot (part# PD3B) do?
It is the moulded rubber foot the machine stands on. It carries the dryer’s weight, grips the floor and absorbs the vibration the fan produces, keeping the machine steady and quieter in use.
How is the tall dryer foot different from the other feet on the machine?
The factory parts drawing lists this one as the tall foot, which sets it apart from the shorter feet and from the separate left and right kickstand feet. Heights are not interchangeable — mixing them will make the dryer rock.
How do I know if my PD3B dryer foot needs replacing?
Replace it if it is torn, split or missing, if the rubber has gone hard and shiny instead of matt and grippy, if the machine creeps across a smooth floor while running, or if the dryer rocks on a flat surface because one foot has compressed more than the rest.
Should I replace all the feet at once?
Yes. Fitting one new foot against three worn ones puts the machine out of level and concentrates the load on the new foot. They cost very little, so replacing the set is the sensible approach.
How do I order the tall dryer foot (part# PD3B) or get help?
You can add the tall dryer foot (part# PD3B) directly to your cart on this page, or call us at 763-535-0770.
You can add this part directly to your cart on this page, or call us at 763-535-0770.






Reviews
There are no reviews yet