Edge Brush Bearing Holder Non-Clamping ULW C013-0900

The Edge Brush Bearing Holder Non-Clamping ULW (part# C013-0900) is a genuine Tacony OEM end support that carries the agitator bearing and edge brushes on ultralight (ULW) cordless vacuums. It is the NON-clamping version of the holder — a different design from the clamping-style holder (part# B013-1500) — so it is important to match the style your machine uses.

Compatible Models for the C013-0900 Edge Brush Bearing Holder

• CleanMax ULW cordless ultralight vacuums (agitator end support)
• Shared across Tacony ULW cordless models (Riccar / Simplicity ultralight)

This is a genuine Tacony OEM part shared across ULW cordless ultralight vacuums. It is the non-clamping design; if your machine uses the clamping-style holder (B013-1500) you need that version instead. Call 763-535-0770 and we will confirm which holder your machine takes.

What the bearing holder does

The bearing holder captures the agitator’s end bearing and carries the edge brushes, holding the brushroll in alignment so it spins smoothly while the edge brushes sweep debris from along walls and baseboards. The non-clamping design seats into the nozzle without a clamp collar. Because it carries a rotating load all shift and its edge brushes drag against baseboards, both the bearing and brushes are wear items.

Signs the bearing holder needs replacing

Replace the holder if the agitator end is noisy, rough, or wobbles, if the bearing has seized or developed play, or if the edge brushes are worn down so they no longer reach the floor edges. A squeal or grind from the nozzle end, or poor edge cleaning, points to a worn bearing holder.

Installation and fit

Power down and open the nozzle to reach the agitator. Lift the agitator end out, fit the new non-clamping holder with its edge brushes onto the agitator end, seat it into the nozzle, and spin the agitator to confirm it turns freely and quietly. Twin City Vacuum has sold and serviced CleanMax equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What is the difference between the non-clamping C013-0900 and the clamping B013-1500 bearing holder?

They are two different designs of the agitator end bearing holder. C013-0900 is the non-clamping version; B013-1500 uses a clamping collar. They are not interchangeable — match the style your machine was built with. Call 763-535-0770 to confirm.

How do I know if my Edge Brush Bearing Holder (part# C013-0900) needs replacing?

Replace it if the agitator end is noisy, rough, or wobbles, if the bearing has seized or has play, or if the edge brushes are worn so they no longer reach the floor edges.

What models is the Edge Brush Bearing Holder (part# C013-0900) compatible with?

It is a genuine Tacony ULW part for cordless ultralight vacuum agitators, shared across CleanMax and related Tacony ULW models. Call 763-535-0770 to confirm it fits your machine.

How do I order the Edge Brush Bearing Holder (part# C013-0900) or get help?

You can add the Edge Brush Bearing Holder (part# C013-0900) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.