Fan Blade Assembly, F6 Axial, 6 Blade X9182-6

$141.99

Genuine OEM six-blade fan blade assembly (part# X9182-6) — the F6 axial impeller that presses onto the motor shaft and moves the air — fits Tornado Windshear and Powr-Flite downdraft air movers (see full compatibility list below).

Genuine OEM six-blade fan blade assembly (part# X9182-6) for F6 axial downdraft air movers — the impeller that presses onto the motor shaft and moves the air. It is a shared service part used on both Tornado Windshear and Powr-Flite machines (see the full compatibility list below).

What the X9182-6 fan blade assembly does

Everything else on an air mover exists to spin this part. The six moulded blades are set at a fixed pitch on an aluminium hub that grips the motor shaft, and as the motor turns, the blades draw air through the intake and throw it out across the floor. Blade count, pitch, diameter and the clearance to the shroud together set the machine’s airflow and its ability to push that air against resistance — which is why a six-blade F6 impeller and a three-blade F5 one are not interchangeable even where the housings look similar.

Because it is the fastest-moving part in the machine, it is also the one least tolerant of damage. An impeller is balanced as a unit; remove material from one blade and the imbalance is carried straight into the motor bearings at full running speed.

When to replace it

Replace the assembly at the first sign of imbalance or structural damage: new vibration, a chip or crack anywhere on a blade, a crack at the hub bore, a hub that slips on the shaft, heat distortion, or witness marks where a blade tip has contacted the shroud. Debris strikes are the usual cause — air movers sit at floor level and draw in whatever is loose.

Do not try to dress out a damaged blade. Filing a chip smooth removes more material and makes the imbalance worse, and a repaired blade running at speed is a safety problem as well as a bearing problem. If the blade has been rubbing the shroud, check the motor mounts and the housing for cracks before fitting the new impeller, or the new one will rub too.

Specifications

  • Part number: X9182-6
  • Description: fan blade assembly, F6 axial
  • Blades: 6
  • Platform: F6 axial downdraft air mover
  • UPC: 098612141648

Compatible Models

The factory fitment record places part# X9182-6 on the Tornado Windshear 98784 downdraft air mover and on the Powr-Flite PDF6WRD air mover — both F6 platform downdraft machines. It is also listed on the Windshear 98785, the 230V export build of the Downdraft, which is not sold in the United States.

  • Tornado Windshear 98784 (downdraft air mover)
  • Powr-Flite PDF6WRD air mover
  • Tornado Windshear 98785 — 230V export build, not sold in the US

Frequently Asked Questions

What does the 6 blade fan blade assembly (part# X9182-6) do on a Tornado Windshear 98784?

The fan blade assembly (part# X9182-6) is the six-bladed impeller that actually moves the air. It presses onto the motor shaft inside the housing, and the blade pitch and diameter together with the shroud around it decide how much air the machine shifts and how much static pressure it can push against. On a downdraft machine the blade draws air in under the shell and discharges it across the floor, which is what dries carpet and hard floors — so the blade is not an accessory to the motor, it is the working end of the machine.

How do I know if the 6 blade fan blade assembly (part# X9182-6) needs replacing?

Vibration is the first sign. A blade with a chip out of its trailing edge, a crack at the hub, or material missing from one blade is out of balance, and an unbalanced impeller will destroy the motor bearings in short order. Look for cracks radiating from the hub bore, a hub that has spun on the shaft or no longer grips it, warped or softened blades from heat, and any contact marks on the blade tips showing it has been rubbing the shroud. A blade that has struck anything should be replaced rather than straightened.

What models is the 6 blade fan blade assembly (part# X9182-6) compatible with?

Part# X9182-6 is listed on the Tornado Windshear 98784 downdraft air mover and on the Powr-Flite PDF6WRD, both of which are built on the F6 downdraft platform. It also appears on the Windshear 98785, the 230V export version, which is not sold in the United States. The sidedraft Windshear 98782 uses a three-blade assembly on a different motor, so the two are not interchangeable.

How do I order the 6 blade fan blade assembly (part# X9182-6) or get help?

You can add the fan blade assembly (part# X9182-6) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Not sure whether your machine takes the six-blade or the three-blade impeller? Browse the full Tornado Windshear air mover parts range, or call us at 763-535-0770 and we will check it against your model number.

Reviews

There are no reviews yet

Be the first to review “Fan Blade Assembly, F6 Axial, 6 Blade X9182-6”

Your email address will not be published. Required fields are marked *