
Foot, Left, Dryer Kickstand, Soft X1375
$1.99
Genuine OEM left-hand soft kickstand foot for commercial carpet dryers and air movers — the non-marking pad that sets the machine’s angle and stops it walking. Fits Tornado and Powr-Flite models (see the full list below).
The soft feet do two jobs that are easy to underestimate. They set the angle the dryer sits at, which determines where the airflow actually lands on the carpet, and they grip the floor so the machine does not creep across it. A centrifugal dryer running at full speed generates real thrust; without working feet it will walk, and a walking dryer either ends up pointing at nothing useful or drags its own cord.
Compatible Models
- Tornado: 98774 Windshear 3200
- Powr-Flite: PDS1 Powr-Dryer
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Because they are soft compound, these feet wear. On a rental or restoration fleet they are usually the first part to go: the pad flattens, hardens with age and UV exposure, or tears away from its mounting post entirely. A machine with one foot missing sits skewed, which both misdirects the air and puts the load onto the housing boss, where it eventually cracks the plastic — turning a two-dollar part into a housing replacement.
This is the left-hand foot. The right-hand foot is part# X1376, and they are handed, so check which one you need before ordering. On a machine that has seen a season of work it is normal to replace both at once; mixing a new soft foot with an old flattened one reintroduces the skew you were trying to fix. Also inspect the kickstand itself (part# X8874) while you are there, since a bent kickstand produces the same symptoms as worn feet.
Frequently Asked Questions
What does the left kickstand foot do on a commercial carpet dryer?
The left kickstand foot (part# X1375) is the soft non-marking pad on the left side of the kickstand. It sets the angle the dryer sits at, which controls where the airflow lands, and it grips the floor so the machine does not walk under its own thrust.
How do I know if my left kickstand foot needs replacing?
Replace it if the pad is flattened, hardened, torn or missing, if the machine creeps across the floor while running, or if the dryer sits skewed rather than square. Replace both feet together — pairing a new foot with an old flattened one leaves the machine sitting crooked.
What models is the foot, Left, Dryer Kickstand, Soft (part# X1375) compatible with?
It fits Tornado 98774 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the foot, Left, Dryer Kickstand, Soft (part# X1375) or get help?
You can add the Foot, Left, Dryer Kickstand, Soft (part# X1375) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.




Reviews
There are no reviews yet