Foot, Left, Dryer Kickstand X8929
$3.99
Genuine OEM left-hand kickstand foot (part# X8929) — the moulded end cap the kickstand wire pivots in on Tornado and Powr-Flite carpet dryers. Sold singly; the right-hand foot is a separate part.
Genuine OEM foot, left, dryer kickstand (part# X8929) for Tornado and Powr-Flite carpet dryers and air movers. This is the moulded end piece on the left-hand side of the machine that the wire kickstand pivots in — the mirror image of the right-hand foot. It fixes the angle the dryer tips back to, carries the load when the machine is propped, and serves as the rear floor contact on that side.
This is the left-hand part only. The right-hand foot carries its own separate part number and the two are not interchangeable. Because both sides take the same abuse, they often need doing together — in that case order one of each.
How it fails: this is the corner of the machine that meets the ground when a dryer is tipped back onto its stand, lifted out of a van, or shoved into position with a boot. The pivot pocket gradually wears oval and lets the kickstand wire rattle; the thin section around the pocket cracks; eventually a piece breaks away and the wire comes loose on that side. Age makes it worse, because the plastic becomes brittle and a knock it once absorbed now splits it.
When to replace it: if the machine will not stay propped at its set angle, if there is side play where the kickstand wire enters the foot, if you can see cracking around the pivot, or if the foot is broken or gone. A kickstand that gives way drops the machine onto its intake side, which risks the fan, the guard and the housing — all of them dearer than this part.
Fitting: support the dryer so it cannot fall, release the kickstand wire on the left side, fit the new foot and refit the hardware. Inspect the right-hand side at the same time; wear is almost always symmetrical.
Compatible Models
- Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version)
- Tornado 98780
- Powr-Flite PD350, PD500 and PDH2 carpet dryers
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Frequently Asked Questions
What does the left kickstand foot (part# X8929) do?
It is the moulded end piece the wire kickstand pivots in on the left-hand side of the dryer. It sets the tipped-back angle, carries the load when the machine is propped, and acts as the rear floor contact on that side.
Is part# X8929 the same as the right-hand foot?
No. X8929 is the left-hand foot and the right-hand foot is a separate mirror-image part with its own number. They are not interchangeable. Because both sides wear together, many people order one of each.
How do I know if my X8929 kickstand foot needs replacing?
Replace it if the dryer will not stay propped at its set angle, if the kickstand wire has side play where it enters the foot, if there is cracking around the pivot pocket, or if the foot is broken or missing.
What models is the left kickstand foot (part# X8929) compatible with?
It fits the Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version), Tornado 98780, and the Powr-Flite PD350, PD500 and PDH2 carpet dryers, plus other models in those families. Call 763-535-0770 to confirm.
How do I order the left kickstand foot (part# X8929) or get help?
You can add the left kickstand foot (part# X8929) directly to your cart on this page, or call us at 763-535-0770.
You can add this part directly to your cart on this page, or call us at 763-535-0770.






Reviews
There are no reviews yet