
Handle Mounting Insert Kit, Carpet Dryer X1416
$17.99
Genuine OEM handle mounting insert kit for commercial carpet dryers — the moulded inserts that anchor the handle frame into the housing. Fits the Tornado Windshear 3200 Safety Dryer.
The handle mounting inserts are the small moulded parts that sit between the steel handle frame and the plastic housing. Their job is to spread the load from a thin steel tube across a much larger area of moulded plastic, so that the force of lifting, pushing and dragging the machine does not concentrate on the edge of a hole.
Compatible Models
- Tornado: 98786 Windshear 3200 Safety Dryer
They are a consumable, and they are the part most people do not realise has failed. The symptom is a handle that has developed play — a few millimetres of rock at the grip that was not there when the machine was new. That play is not in the handle, it is in the inserts, and because it grows slowly most operators adjust to it rather than reporting it. Left alone, the loose handle works the housing bosses until the plastic itself cracks, at which point the repair is a housing rather than a two-figure kit.
Fit them whenever the handle frame is off for any other reason — the labour is already spent and the parts are cheap. If the frame or the rolling gear has also failed, the complete wheel and handle assembly is part# X1420 and the wheel and axle kit alone is part# X1422. Inspect the housing bosses at the same time; an insert that has been running loose usually leaves witness marks, and a cracked boss will not hold a new insert any better than it held the old one.
Frequently Asked Questions
What does the handle mounting insert kit do on a commercial carpet dryer?
The handle mounting insert kit (part# X1416) supplies the moulded inserts that anchor the steel handle frame into the plastic housing. They spread the load from the handle across a wide area of the moulding so that lifting and pushing forces do not concentrate on the edge of a hole.
How do I know if my handle mounting inserts need replacing?
The giveaway is play at the handle — a few millimetres of rock at the grip that was not there when the machine was new. That movement is in the inserts, not the handle. Replace them before the loose handle works the housing bosses enough to crack the plastic, which turns a cheap kit into a housing replacement.
What models is the handle Mounting Insert Kit, Carpet Dryer (part# X1416) compatible with?
It fits Tornado 98786 Windshear 3200 Safety Dryer. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the handle Mounting Insert Kit, Carpet Dryer (part# X1416) or get help?
You can add the Handle Mounting Insert Kit, Carpet Dryer (part# X1416) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.





Reviews
There are no reviews yet