Housing, Left, Non-Motor Side, Carpet Dryer X1370
$75.99
Genuine OEM left-hand (non-motor side) blower housing shell for commercial carpet dryers and air movers — fits Tornado and Powr-Flite models (see the full list below). Moulded in impact-resistant plastic with the integral kickstand mounts and grill tabs.
The left housing is the non-motor half of the two-piece clamshell that forms the blower scroll on these dryers. It carries the fixed half of the air path, so its internal curve is what turns the squirrel-cage fan’s output into usable directed airflow. It also carries the moulded bosses that the kickstand feet, the grill and the through-bolts anchor into, which is why damage here shows up as rattles and lost airflow at the same time.
Compatible Models
- Tornado: 98774 Windshear 3200, 98786 Windshear 3200
- Powr-Flite: PDS1 Powr-Dryer
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Because these machines are routinely dropped off van tailgates, stacked on job sites and kicked into position rather than carried, the housing is one of the most commonly cracked parts on the whole unit. A hairline crack along the scroll wall bleeds pressure, and the machine’s output drops noticeably even though the motor and fan are still fine. A broken kickstand boss lets the dryer sit flat instead of at its intended angle, which changes where the air actually lands on the carpet.
This is the non-motor side specifically. The two halves are not interchangeable — the opposite half (part# X1371) carries the motor mounting face and the cord entry. If you are rebuilding a crushed machine, check both halves before ordering, since an impact hard enough to split one side has usually stressed the other. The through-bolts (part# X1377) and flat washers (part# X8218) that clamp the two halves together are sold separately and are worth replacing at the same time if they have been over-torqued.
Frequently Asked Questions
What does the left housing do on a commercial carpet dryer?
The left housing (part# X1370) is the non-motor half of the blower clamshell. Its internal scroll shape converts the squirrel-cage fan’s output into directed airflow, and it provides the mounting bosses for the kickstand foot, the grill and the assembly through-bolts.
How do I know if my left housing needs replacing?
Look for cracks along the scroll wall or around the bolt bosses, a broken or missing kickstand mounting point, a machine that will not sit at its proper angle, or a noticeable drop in airflow with no fault in the motor or fan. Any crack that passes through the air path is a replacement, not a repair — glue will not hold against the pressure differential.
What models is the housing, Left, Non-Motor Side, Carpet Dryer (part# X1370) compatible with?
It fits Tornado 98774 Windshear 3200, 98786 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the housing, Left, Non-Motor Side, Carpet Dryer (part# X1370) or get help?
You can add the Housing, Left, Non-Motor Side, Carpet Dryer (part# X1370) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.






Reviews
There are no reviews yet