Keps Nut X8256
$2.99
Genuine OEM keps nut (part# X8256) with a captive external-tooth lock washer — a shared fastener used across many Tornado and Powr-Flite floor-care machines; see the fitment notes below.
Genuine OEM keps nut (part# X8256), one of the most widely shared fasteners in the Tornado and Powr-Flite floor-care range. A keps nut — sometimes called a K-lock or washer nut — is a hex nut with an external-tooth lock washer permanently captive under the flange. The washer spins freely until the nut is tightened, then its teeth bite into the mating surface and resist loosening under vibration.
That is precisely why it is used on this equipment. Air movers, carpet dryers and extractors vibrate continuously in service, and a plain nut on a motor mount or a foot bracket will walk loose over a season. The keps nut gives you a locking fastener that still installs with a single wrench and a single hand, which matters when you are working inside a crowded housing.
Where you will meet it: motor mounting hardware, kickstand and foot brackets, handle hardware and bracket fixings. On the Windshear SD3500 air mover it appears in the motor and foot assemblies; on the extractors in the same fitment list it does similar duty.
When to replace it: replace rather than reuse whenever the teeth on the captive washer are flattened or polished smooth, whenever the nut has been removed and refitted several times, if the hex corners are rounded, or if there is any corrosion on the threads. A keps nut is a one-shot locking device in practice — once the teeth have bedded in and been backed off, it no longer grips as designed. At this price there is no reason to reuse a tired one on a motor mount.
A caution: do not substitute a plain nut and a separate washer because it is what is in the drawer. The captive tooth washer is what stops the fastener backing out, and a motor mount that loosens in service will let the motor shift, throw the fan out of balance and chew the housing.
Because it is shared across so many machines, it is worth keeping a handful on the shelf. We stock it alongside the rest of the Tornado and Powr-Flite hardware.
Compatible Models
- Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version)
- Tornado 98778 and 98780
- Powr-Flite PDH2 and other Powr-Flite dryers and extractors
- used very widely across the Tornado and Powr-Flite range — call 763-535-0770 and we will confirm it against your machine
Frequently Asked Questions
What is a keps nut, and what does part# X8256 do?
A keps nut is a hex nut with an external-tooth lock washer held captive under the flange. The washer spins free until you tighten the nut, then bites into the mating surface to resist vibration. On these machines X8256 is used on motor mounting hardware, kickstand and foot brackets and handle fixings.
How do I know if my X8256 keps nut needs replacing?
Look at the teeth on the captive washer. If they are flattened or polished smooth, if the nut has been on and off several times, if the hex corners are rounded, or if the threads are corroded, fit a new one. In practice a keps nut is a single-use locking fastener.
Can I use a plain nut and a separate lock washer instead?
We would not recommend it. The captive tooth washer is what keeps the fastener from backing out under constant vibration. A motor mount that works loose lets the motor shift, which throws the fan out of balance and damages the housing.
What models is the keps nut (part# X8256) compatible with?
It is used very widely, including the Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version), Tornado 98778 and 98780, and a long list of Tornado and Powr-Flite dryers and extractors. Call 763-535-0770 with your model and we will confirm it.
How do I order the keps nut (part# X8256) or get help?
You can add the keps nut (part# X8256) directly to your cart on this page, or call us at 763-535-0770.
You can add this part directly to your cart on this page, or call us at 763-535-0770.






Reviews
There are no reviews yet