Knob, Switch, Carpet Dryer X1374
$1.99
Genuine OEM speed-switch knob for commercial carpet dryers and air movers — the control knob that selects the blower speed. Fits Tornado and Powr-Flite models (see the full list below).
The knob is the operator’s only point of contact with the speed switch, and it is a push-on moulding that takes every bit of the torque applied to it. Its internal flats grip the switch shaft; when those flats round off, the knob spins freely and the machine appears stuck on whatever speed it was last set to, even though the switch underneath is working perfectly.
Compatible Models
- Tornado: 98774 Windshear 3200, 98786 Windshear 3200
- Powr-Flite: PDS1 Powr-Dryer
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
This is one of the cheapest parts on the machine and one of the most common reasons a dryer gets pulled out of a rental fleet. It is worth checking before you condemn anything more expensive: pull the knob off and turn the switch shaft directly with pliers. If the speeds change, the switch is fine and you need a knob. If they do not, the fault is in the 3-speed switch (part# X9830) or the control panel assembly (part# X1372A).
Knobs also crack rather than round off, particularly on machines stored outdoors or in unheated vans where the plastic goes brittle in the cold. A cracked knob will often still work until the moment it splits completely, so if you have the machine apart for other reasons it is sensible to replace a cracked one rather than wait. Fit the new knob by pushing it straight onto the shaft with the switch set to a known position so the pointer reads correctly.
Frequently Asked Questions
What does the switch knob do on a commercial carpet dryer?
The switch knob (part# X1374) is the control knob that selects blower speed. Its internal flats grip the speed-switch shaft so that turning the knob rotates the switch through its speed positions.
How do I know if my switch knob needs replacing?
Replace it if the knob spins freely without changing the speed, if it is cracked or split, or if the pointer no longer lines up with the panel markings. To confirm the knob is the fault and not the switch, pull the knob off and turn the switch shaft directly — if the speeds change, you need a knob, not a switch.
What models is the knob, Switch, Carpet Dryer (part# X1374) compatible with?
It fits Tornado 98774 Windshear 3200, 98786 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the knob, Switch, Carpet Dryer (part# X1374) or get help?
You can add the Knob, Switch, Carpet Dryer (part# X1374) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.






Reviews
There are no reviews yet