Lid Gasket (30082B / 30079)

The Lid Gasket is the genuine Tacony OEM seal that closes the gap between the lid and the housing on the Tornado CK 3030 wide-area vacuum (Model 93030). Tacony specifies a different gasket by series, so this listing carries both: 30082B for Series E and 30079 for Series H. Select your series above to identify the correct part number.

Everything this machine does depends on a sealed air path. The vacuum motor lowers pressure inside the housing and the resulting airflow carries debris from the nozzle into the bag; if the lid does not seal, air takes the short route in through the gap instead of the long route through the carpet. The result is a machine that sounds normal and has a clean bag but will not pick up. The lid gasket is a cheap part guarding an expensive symptom, and it is one of the first things to check when a CK 3030 loses suction for no obvious reason.

Gaskets are a genuine wear item. Foam and rubber take a compression set over years of the lid being latched down, and the corners go first. Replace the gasket whenever it has flattened, hardened, split or lifted from its channel — and whenever you have the lid off for other work, since it costs nothing to check and a failed seal quietly wastes suction every day it is left.

Important: Series D, F and G do not use either part on this page. Those machines take the adhesive-backed Lid Gasket w/Adhesive, part# 30078, which Tacony lists as a distinct part with a different description. Confirm your series before ordering.

Compatible Models for the Lid Gasket

• Tornado CK 3030 Wide Area Vacuum (Model 93030) — Series E and H

Many Tacony fasteners and components are shared more widely across the Tornado, CleanMax, Riccar, Simplicity and Powr-Flite ranges; if your machine is not listed, call us at 763-535-0770 and we will confirm before you order.

Twin City Vacuum has been selling and servicing Tacony equipment since 1956. Browse the full Tornado 93030 main assembly parts, or read more on the Tornado manufacturer site.

Pricing: neither 30082B nor 30079 is currently carried in the online dealer catalogue, so this page is listed for identification. Call 763-535-0770 and we will source the gasket for your series and quote you.

Frequently Asked Questions

What does the Lid Gasket do on the Tornado 93030?

It seals the lid against the housing so the airflow the vacuum motor creates is pulled through the bag and filter rather than leaking in around the lid edge. A wide-area machine relies on that seal for suction at the nozzle; any gap at the lid is airflow that never reaches the carpet.

Which part number do I need, 30082B or 30079?

Choose by series. Series E uses 30082B (item 77 on the Series E diagram) and Series H uses 30079 (item 72 on the Series H exploded view). Note that Series D, F and G use a different, adhesive-backed part — the Lid Gasket w/Adhesive, part# 30078 — which is listed separately and is not interchangeable with these.

How do I know if my Lid Gasket needs replacing?

The usual sign is suction that has fallen off with a clean bag and a clear hose. Check the gasket for flat spots where it has taken a permanent set, splits or tears at the corners, sections that have hardened and no longer spring back when pressed, or any length that has come away from its channel. A simple check: close the lid on a strip of paper and pull — if it slides out with no drag at that point, the seal is not made there.

How do I order the Lid Gasket (part# 30082B or 30079) or get help?

Neither of these two gaskets is currently listed in the online dealer catalogue, so no price is shown. Select your series above to confirm the part number you need, then call us at 763-535-0770 and we will source it and quote you. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.