Lindhaus Dynamic Base Housing Cover 12 inch 087064681
$50.00
Genuine Lindhaus Dynamic Base Housing Cover 12 inch (part# 087064681) — item #58 on the Lindhaus Dynamic parts diagram. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The base housing cover 12 inch (part# 087064681) is the genuine Lindhaus replacement panel that closes off the underside of the 12-inch-wide power nozzle, enclosing the brush-roll chamber and guiding airflow across the full width of the cleaning path. When this base housing cover 12 inch is cracked, warped, or missing tabs, the nozzle loses its seal and the machine can no longer pull dirt evenly along the floor.
On the Lindhaus Dynamic and Dynamic Eco-Force uprights, the cover sits directly beneath the motor housing and brush roll, so it takes the brunt of everyday abrasion from carpet, grit, and hard-floor edges. Over years of use the plastic can fatigue at the mounting points, and a loose panel will rattle, drop suction, or let the brush roll wander out of alignment. Replacing the base housing cover 12 inch restores the sealed bottom the nozzle needs to keep airflow tight and the agitator seated correctly.
Installation is straightforward for the do-it-yourselfer: with the machine unplugged and laid on its back, remove the retaining screws, lift the old panel away, transfer any clips, and set the new base housing cover 12 inch into place before reseating the fasteners. Because it is the exact OEM part number 087064681, it lines up with the factory bosses without trimming or shimming. If a worn agitator or belt is showing at the same time, this is the ideal moment to inspect and refresh those wear items as well.
This base housing cover 12 inch is a shared Lindhaus service panel, and the same base housing cover 12 inch fits every model in the list below.
Compatible Models
- Lindhaus Dynamic
- Lindhaus Dynamic Eco-Force
Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse the full Lindhaus vacuum parts collection, or view the complete lineup on the official Lindhaus USA site. Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions About the Base Housing Cover 12 Inch
What does the base housing cover 12 inch do on the Lindhaus Dynamic?
It seals the bottom of the 12-inch power nozzle and encloses the brush-roll chamber, keeping suction concentrated at the floor and holding the agitator in proper alignment.
How do I know if my base housing cover 12 inch needs replacing?
Look for cracks, warping, broken mounting tabs, a rattling nozzle, or a noticeable drop in pick-up on carpet. Any of these means the panel is no longer sealing and should be replaced.
What models is the base housing cover 12 inch (part# 087064681) compatible with?
It fits the Lindhaus Dynamic and the Lindhaus Dynamic Eco-Force upright vacuums that use the 12-inch cleaning width.
How do I order the base housing cover 12 inch (part# 087064681) or get help?
You can add the base housing cover 12 inch (part# 087064681) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
