Lindhaus Dynamic Cord 3 Wires 022660028
$13.00
Genuine Lindhaus Dynamic Cord 3 Wires (part# 022660028) — item #52 on the Lindhaus Dynamic parts diagram. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The cord 3 wires (part# 022660028) is the genuine Lindhaus three-conductor power supply cord that carries line, neutral, and ground to the vacuum’s motor and switch. If your Lindhaus upright has intermittent power, sparks at the plug, or a jacket that is nicked, cut, or heat-damaged, this cord 3 wires is the correct OEM replacement to get the machine safely running again.
A power cord takes more abuse than almost any other part on an upright vacuum. It gets stepped on, rolled over, yanked from the outlet, and wrapped tightly around the cord hooks after every use. Over time that flexing fatigues the copper strands inside the cord 3 wires, and a break in any one of the three conductors can cause the vacuum to cut in and out, run only when the cord is held at a certain angle, or stop working entirely. A damaged outer jacket is a shock and fire hazard and should never be taped over — the cord should be replaced.
The cord 3 wires (022660028) is the exact factory assembly, so the wire gauge, length, and strain-relief terminations match the original. That means it seats into the housing and connects to the switch without splicing or improvising. Replacing a worn cord is a common, affordable repair that restores safe, reliable power and often brings a machine that seemed dead right back to life.
This cord 3 wires is a shared Lindhaus service part and fits every model listed below.
Compatible Models
- Lindhaus Dynamic
- Lindhaus Dynamic Eco-Force
Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse the full Lindhaus vacuum parts collection, or view the complete lineup on the official Lindhaus USA site. Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions About the Cord 3 Wires
What does the cord 3 wires do on the Lindhaus Dynamic?
It is the three-conductor power cord that delivers line, neutral, and ground from the wall outlet to the vacuum motor and on/off switch.
How do I know if my cord 3 wires needs replacing?
Replace it if you see cuts, cracks, exposed conductors, scorching at the plug, or if the vacuum loses power intermittently when the cord is flexed or moved.
What models is the cord 3 wires (part# 022660028) compatible with?
It fits the Lindhaus Dynamic and the Lindhaus Dynamic Eco-Force upright vacuums.
How do I order the cord 3 wires (part# 022660028) or get help?
You can add the cord 3 wires (part# 022660028) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
