Lindhaus Kit Motor Support (Electric) 181980381
Genuine Lindhaus Kit Motor Support (Electric) (part# 181980381). Fits Lindhaus LW46, LS50. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The LS50 Motor Support Kit, genuine part number 181980381, is the set of mounting supports that cradle and isolate the suction motor inside your Lindhaus LS50 Electric.
Sold as a two-piece kit, these supports hold the motor firmly in its housing while damping the vibration a running motor produces. Keeping the motor properly seated protects surrounding components and keeps the machine quiet and smooth.
About the LS50 Motor Support Kit
Each support in the kit is molded to match the LS50 motor and housing exactly, so the motor sits at the correct height and angle. Genuine supports keep airflow paths and wiring clearances the way Lindhaus designed them.
Compatible Models
- Lindhaus LS50 Electric
- Lindhaus LW46
Symptoms that point to worn motor supports include increased noise or a rattle from the motor area, more vibration through the handle, or a motor that has shifted from its normal position. Over years of use the supports can compress, crack or harden, letting the motor move and transmit more noise into the body of the vacuum.
Replacing the supports is best done while the motor is out for service. With the housing open, lift the motor, remove both worn supports, fit the two new pieces from kit 181980381 into their seats, and reseat the motor. Installing the complete kit rather than a single piece keeps support even on both sides.
Because it is a genuine two-piece Lindhaus set, both supports share the same firmness and dimensions, so the motor is held evenly and vibration is controlled the way the factory intended. Replacing them as a pair also avoids a mismatch that could let the motor sit at a slight angle.
Buying the matched kit by part number takes the guesswork out of a motor repair. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. See more Lindhaus LS50 parts or explore the lineup at Lindhaus.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions
What is the LS50 Motor Support Kit for?
The kit is the pair of molded supports that hold the suction motor in place inside the Lindhaus LS50 Electric and absorb its vibration, keeping the motor seated and the machine running quietly.
How can I tell my motor supports are worn?
Listen for new rattles or louder motor noise, feel for extra vibration in the handle, or check whether the motor has shifted position. Compressed, cracked or hardened supports cause all three.
How many pieces come with part 181980381?
Part 181980381 is a two-piece kit for the Lindhaus LS50 Electric, giving you both motor supports so you can replace them as a matched set.
How do I order the LS50 Motor Support Kit?
Order the LS50 Motor Support Kit, part number 181980381, by adding it to your cart on this page, or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has served Lindhaus owners since 1956.
