Lindhaus LS50 Circuit Control Board 024560000
$258.00
Genuine Lindhaus Circuit Control Board (part# 024560000) — item #117 on the Lindhaus LS50 parts diagram. Fits Lindhaus LS50. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The Lindhaus LS50 control board, part number 024560000, is the printed circuit board that powers and coordinates the electronics inside your LS50 Electric upright vacuum. It routes current from the power cord to the suction motor and the brushroll motor, reads the on/off switch, and helps protect the machine from electrical faults.
Signs your Lindhaus LS50 control board has failed
Because every electrical function of the LS50 Electric passes through this board, its condition directly determines whether the vacuum starts and runs consistently. A healthy board delivers steady power to both motors so suction and brushroll performance stay reliable load after load.
A failing board is usually easy to recognize. The vacuum may be completely dead even though the outlet and cord test good, it may cut out intermittently during use, the brushroll may stop while suction continues or the reverse, and you may notice a faint burnt-electronics smell near the switch. A machine that only runs when you wiggle the switch or that flickers on and off also points to a cracked or worn control board.
Replacing the control board is a moderate repair. With the vacuum unplugged, the housing is opened, the wiring connectors are unclipped from the old board, the board is unscrewed and lifted out, and the new 024560000 board is fitted in the same orientation with every connector returned to its original terminal. If you are not comfortable working inside the machine, our service department can install it for you.
Installing the correct Lindhaus LS50 control board takes the guesswork out of an electrical problem and gets your vacuum back to full power instead of leaving you chasing a loose wire or a suspect switch.
Compatible Models
- Lindhaus LS50 Electric
Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse more Lindhaus LS50 parts or explore the full lineup at Lindhaus.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions
What does the Lindhaus LS50 control board do?
The control board, part number 024560000, is the circuit board that distributes power from the cord to the suction and brushroll motors and reads the on/off switch on the LS50 Electric. It keeps the vacuum running safely and consistently.
How do I know my LS50 control board needs replacing?
Common signs are a completely dead vacuum when the cord and outlet test good, intermittent cut-outs during use, one motor running while the other does not, or a burnt electronic smell near the switch.
What models and part number does this control board fit?
It fits the Lindhaus LS50 Electric. Call us at 763-535-0770 and we will confirm the right part for your machine.
How do I order the Lindhaus LS50 control board?
To order the Circuit Control Board, part number 024560000, add it to your cart on this page, or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has served Lindhaus owners since 1956.
