Lindhaus Microswitch Brush Motor 024100000
$39.80
Genuine Lindhaus Microswitch Brush Motor (part# 024100000). Fits Lindhaus LW46, LS50. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The Lindhaus brush motor microswitch (part# 024100000) is a genuine Lindhaus OEM microswitch used on the LS50 Hybrid and LW46 Hybrid floor machines. This lindhaus brush motor microswitch signals the machine’s electronics about the brush motor circuit, controlling when the powered brushroll is allowed to run.
Compatible Models for the Lindhaus Brush Motor Microswitch
- Lindhaus LS50 Hybrid
- Lindhaus LW46 Hybrid
A microswitch is a small, precise switch that changes state with very little movement, and the lindhaus brush motor microswitch does exactly that job for the brush-motor circuit. It gives the control system a clean on or off signal so the powered brush engages and disengages at the right moments. When the microswitch fails, the brush may refuse to run, run when it should not, or behave intermittently even though the brush motor itself is sound.
Replace the lindhaus brush motor microswitch if the powered brush will not switch on or off correctly, cuts in and out, or responds erratically, once the fault has been traced to the switch rather than the motor or wiring. Because it is an electrical part, confirm the diagnosis before ordering. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956 and supplies genuine Lindhaus components.
Service the machine powered down, unplugged, and isolated from the battery. Note the switch orientation and each wire position before removing the old part so the replacement is fitted and wired the same way. Browse related Lindhaus LS50 vacuum parts for other control components, or confirm the correct switch for your model at Lindhaus (lindhaus.com/us).
Lindhaus Brush Motor Microswitch — Frequently Asked Questions
What does the Lindhaus brush motor microswitch do on the LS50 and LW46 Hybrid?
It is a small precise switch that signals the control electronics about the brush-motor circuit, telling the system when to allow the powered brushroll to run and when to stop it.
How do I know if my Lindhaus brush motor microswitch needs replacing?
Typical signs are a powered brush that will not switch on or off properly, cuts in and out, or responds erratically, once the fault is traced to the switch rather than the motor or wiring.
What models is the Lindhaus brush motor microswitch (part# 024100000) compatible with?
It fits the Lindhaus LS50 Hybrid and the Lindhaus LW46 Hybrid.
How do I order the Lindhaus brush motor microswitch (part# 024100000) or get help?
You can add the Lindhaus brush motor microswitch (part# 024100000) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
