Lindhaus Motor Brush Cover White 181163681

The Lindhaus motor brush cover white (part# 181163681) is the genuine white top cover that encloses the brush motor on the current quick-release PB12e and PB14e power nozzles. It fits the Lindhaus PB12e quick-release power nozzle, PB14e quick-release power nozzle, PB12/PB14 Lion quick-release power nozzle, PB14 L-ion power nozzle and PB12/PB14 power nozzle (The Maids version).

What the Lindhaus Motor Brush Cover White Does

This cover is callout 100 on the Lindhaus quick-release PB12e drawing. It snaps over the brush motor, the drive belt area and the circuit board, keeping dust, hair and debris out of the motor compartment and keeping fingers away from the moving drive. It also carries the openings for the indicator lens set and gives the nozzle its finished white look.

Lindhaus redesigned this cover for the quick-release generation, so it is a different part from the motor brush cover on the standard PB12e and PB14e (083963681). The quick-release cover is shaped around the quick-release swivel joint and the LED lens set used on these nozzles. If your nozzle unplugs from the wand with a quick-release coupling rather than a fixed cord, this is the cover you need.

Because the PB12e and PB14e share the same body layout, the same cover fits both the 12-inch and 14-inch quick-release heads, including the version sold to The Maids, which differs only in its power cord.

Quick-release nozzles are easy to spot: instead of a cord running out of the swivel joint to the wand, the nozzle unplugs from the wand at a coupling. If your nozzle has a fixed cord at the joint, it is the standard PB12e or PB14e and uses a different part, so check before ordering, or call 763-535-0770 with the serial number from the label under the nozzle and we will confirm it for you.

Signs Your Motor Brush Cover Needs Replacing

Replace the cover if it is cracked, has broken mounting tabs, no longer clips down tight, or has been chipped by impact against furniture. A loose or broken cover lets debris into the motor area, can rattle at speed, and can expose the drive belt. Check the lens set and screws when you fit the new cover.

Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse more Lindhaus vacuum parts or see the manufacturer’s range at lindhaus.com.

Compatible Models

• Lindhaus PB12e quick-release power nozzle
• Lindhaus PB14e quick-release power nozzle
• Lindhaus PB12/PB14 Lion quick-release power nozzle
• Lindhaus PB14 L-ion power nozzle
• Lindhaus PB12/PB14 power nozzle (The Maids version)

Lindhaus Motor Brush Cover White — Frequently Asked Questions

What does the motor brush cover do on the Lindhaus PB12e quick-release power nozzle, PB14e quick-release power nozzle, PB12/PB14 Lion quick-release power nozzle, PB14 L-ion power nozzle and PB12/PB14 power nozzle (The Maids version)?

It encloses the brush motor, belt and circuit board on the quick-release PB12e and PB14e, keeping debris out and covering the drive.

How do I know if my motor brush cover needs replacing?

Replace it if it is cracked, missing clips, loose, or rattles when the brush is running.

What models is the motor brush cover (part# 181163681) compatible with?

The motor brush cover (part# 181163681) fits the Lindhaus PB12e quick-release power nozzle, PB14e quick-release power nozzle, PB12/PB14 Lion quick-release power nozzle, PB14 L-ion power nozzle and PB12/PB14 power nozzle (The Maids version). If you are not sure which version your machine takes, call us and we will confirm it.

How do I order the motor brush cover (part# 181163681) or get help?

You can add the motor brush cover (part# 181163681) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.