Lindhaus Back Bumper Gasket 380 (14″) 002573812
$2.64
Genuine Lindhaus Back Bumper Gasket 380 (14″) (part# 002573812). Fits the Lindhaus RX380 Eco-Force and PB15e, and the Lindhaus RX Hepa and PB12e power nozzle, PB14e power nozzle. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The Lindhaus Back Bumper Gasket 380 (14″) (part# 002573812) is the blue rear bumper gasket for the 14-inch RX power brush on the Lindhaus RX380 Eco-Force. Lindhaus lists it as back bumper gasket 380 (14″) blue. It fits the Lindhaus RX380 Eco-Force and PB15e.
What the Lindhaus Back Bumper Gasket 380 (14″) Does
The back bumper gasket runs along the rear edge of the power brush. It cushions the back of the head when the operator pulls it back against furniture and walls, and it closes the gap at the back of the base so dust is not pushed out of the brush chamber as the head moves. This gasket is cut to the 14-inch head, the narrowest RX head, chosen for offices, classrooms and hotel rooms where furniture is close together and the head has to get between desk legs and along tight walls.
It is a small, inexpensive part, but a missing or torn gasket leaves a gap at the rear of the head and an exposed edge that marks furniture as the machine is pulled back.
Signs Your Back Bumper Gasket Needs Replacing
Replace the back bumper gasket if it is torn, flattened, hardened or missing, or if you can see dust escaping from the back of the head while it runs. This gasket fits the 14-inch RX380 Eco-Force and 14-inch RX Hepa heads only.
Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse more Lindhaus vacuum parts or see the manufacturer’s range at lindhaus.com.
Lindhaus also lists the back bumper gasket 380 (14″) (part# 002573812) for the Lindhaus RX Hepa and PB12e power nozzle, PB14e power nozzle.
Compatible Models
- Lindhaus RX380 Eco-Force
- Lindhaus PB15e
- Lindhaus RX Hepa
- Lindhaus PB12e power nozzle, PB14e power nozzle
Lindhaus Back Bumper Gasket 380 (14″) — Frequently Asked Questions
What does the back bumper gasket do on the Lindhaus RX380 Eco-Force?
It cushions and seals the rear edge of the 14-inch power brush.
How do I know if my back bumper gasket needs replacing?
Tears, flattening, hardening or a missing section are the signs.
What models is the back bumper gasket (part# 002573812) compatible with?
The back bumper gasket (part# 002573812) fits the Lindhaus RX380 Eco-Force and PB15e. Lindhaus makes this part in three widths for the RX380, RX450 and RX500 Eco-Force; order the width that matches your head, or call us with your serial number and we will confirm it. Lindhaus also lists the back bumper gasket 380 (14″) (part# 002573812) for the Lindhaus RX Hepa and PB12e power nozzle, PB14e power nozzle.
How do I order the back bumper gasket (part# 002573812) or get help?
You can add the back bumper gasket (part# 002573812) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.





