Lindhaus Power Brush 450 (16″) Complete 190564680
$528.00
Genuine Lindhaus power brush, complete 16″ assembly (part# 190564680), for the Lindhaus RX Hepa and RX450 Eco-Force. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The Lindhaus power brush (part# 190564680) is the fully assembled genuine Lindhaus 16″ power nozzle for the RX450 Eco-Force. This Lindhaus power brush swaps the entire mid-width powered head in one piece — the driven brush roll, drive train, base plate, and shell all arrive matched from the factory. For a busy 16″ RX450 that has reached the point of multiple worn components, the Lindhaus power brush is the fast, reliable way to bring the machine back to full carpet performance. Browse individual RX components on our Lindhaus vacuum parts page. Call 763-535-0770 if you need help confirming which Lindhaus model you have. Call 763-535-0770 if you need help confirming which Lindhaus model you have.
Compatible Models
- Lindhaus RX Hepa
- Lindhaus RX450 Eco-Force
Sized at 16″, this Lindhaus power brush sits between the 14″ RX380 and the 18″ RX500 in the Eco-Force lineup, giving the wider cleaning path that larger rooms and light-commercial routes benefit from. Delivered as a complete unit, the assembly removes the guesswork of sourcing and matching a housing, agitator, belt, and bearings separately. Reach for the Lindhaus power brush when an 16″ head is cracked, the drive has failed, or wear has spread across the nozzle. The RX450 Eco-Force specifications are documented on the official Lindhaus USA site.
Installation is a swap rather than a rebuild: disconnect the old 16″ nozzle and fit the new Lindhaus power brush following the machine’s service guide, then verify the agitator turns freely and the head glides evenly. No internal reassembly is needed. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956, and this Lindhaus power brush is a genuine Lindhaus factory assembly rather than an aftermarket or rebuilt substitute.
Frequently Asked Questions About the Lindhaus power brush
What is the Lindhaus power brush for the Lindhaus RX Hepa and RX450 Eco-Force?
The Lindhaus power brush (part# 190564680) is the complete 16″ powered nozzle for the Lindhaus RX Hepa and RX450 Eco-Force. It replaces the whole brush head as a single factory-assembled unit instead of separate internal parts.
When does a complete 16″ head make more sense than single parts?
Pick the Lindhaus power brush when the 16″ nozzle has several failures together — for example a cracked housing plus a worn agitator or dead drive — where a full assembly is more cost-effective and dependable than replacing parts one at a time.
How does this differ from the 14″ and 18″ versions?
This is the 16″ version for the Lindhaus RX Hepa and RX450 Eco-Force. The 14″ and 18″ machines use their own complete assemblies; the design is shared across the range, but each is sized to its own nozzle width.
How do I order the Lindhaus power brush (part# 190564680) or get help?
You can add the Lindhaus power brush (part# 190564680) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
